Very beautiful men's pullovers made with knitting needles. Schemes of patterns and descriptions of knitting under the cut. A total of 10 models, including 2 for children

You will need: Yarn Art Super Merino (50% wool, 50% acrylic, 100 g/280 m); circular knitting needles No. 3.5.
Size: 48 If you knit in two threads, it will turn out like the original.
Patterns:
elastic band 2x2 - knit 2, purl 2;
“roller” - 1st r. (front): purl. p.;
then knit in 2 threads: 2nd and 4th r.: k1, slip 1 (thread before work);
3rd and 5th rows: purl 1, slip 1 (thread before work), 6th row. (knit in 1 thread): knit. p.;
patterns 1-4 - knit according to the corresponding patterns.
Elastic stacked hem:
Using an auxiliary thread, cast on the number of stitches half as much as required + 1 stitch. Continue knitting with a thread of the main color (1st p. knit), knit 5 p. persons satin stitch On the 6th p.m. *Knit the 1st p., pull out a new p. from the broach of the 1st p. main color and knit.* Repeat until the end of the row.
Back:
Cast on 76 sts and knit 7 cm with 2x2 rib. Tie a roller. Next, distribute the loops as follows: 1 edge, 6 sts of pattern 1, 10 sts of pattern 2, 6 sts of pattern 1, 30 sts of pattern 3, 6 sts of pattern 1, 10 sts of pattern 2, 6 sts of pattern 1 , chrome At a height of 43 cm, close the armholes on each side in every 2nd r. 2x3 sts. At a height of 65 cm, close off the middle 18 sts for the neckline and finish both sides separately. On each side for the neckline, decrease in every 2 r. 3x2 p. At the same time, for the shoulder bevels, decrease from the armhole side in every 2nd r. 3x6 and 1x5 p.
Before:
Knit like the back, but with a deeper neckline. At a height of 61.5 cm, close off the middle 12 stitches for the neckline and finish both sides separately. On each side for the neckline, decrease in every 2 r. 3x3 p. At a height of 65 cm, make decreases for the shoulder bevels, as on the back.
Sleeve:
Cast on 46 sts and knit 7 cm with 2x2 rib. Tie a “roller”, in the 6th row. which evenly add 3 sts = 49 sts. Next, distribute the loops as follows: 1 chrome, 10 sts of pattern 2, 3 sts of pattern 1, 21 sts of pattern 4, 3 sts of pattern 1, 10 sts of pattern 2, 1 chrome Add on each side every 10th r. 6x1 p., then in every 6th p. 4x1 p. = 69 p. For the okat, close 1x6 p. on each side, then in every 2nd r. 10x1 p. and 3x3 p., then bind off the remaining 39 p.
Collar:
Cast on 88 sts and knit 34 r. rubber band 2x2. Perform a “roller” and knit another knit. r. persons p. Next, knit 2-3 p. using an auxiliary thread of a contrasting color and bind off the loops.
Assembly:
Sew shoulder seams. Baste the collar to the neckline and sew with a quilt stitch, then unravel the auxiliary thread. Sew side seams and sleeve seams.
Knitting a snood is quite simple - you knit it like a wide scarf with a voluminous pattern on top, make a strip and pull a lace through it, and an additional strip for buttons.

Sizes: 46/48 (50/52) 54/56
You will need: 700 (750) 750 g blue melange yarn Denim (99% cotton, 115 m/50 g); straight and circular knitting needles No. 4.
Elastic band: the number of loops is a multiple of 5 + 2 edges. Each row begins and ends with 1 chrome. Persons r.: P1, * K1, P1, K1, P2, repeat from *, finish K1, P1, K1, P1. Out. r.: knit loops according to the pattern.
Braid pattern: the number of loops is a multiple of 30 +15. Knit according to the pattern, which shows only persons. r., in purl. r. knit loops according to the pattern. Repeat the rapport 4 times, finishing with the first 15 stitches of the rapport. Repeat 4 times from 1st to 36th row. (= RUR 144), then knit with an elastic band.
Knitting density: 27 p. and 27 r. = 10 x 10cm.

Back: cast on 147 (157) 167 sts and knit 7 cm with an elastic band. Then knit as follows: chrome, 4 (9) 14 stitches of elastic, 135 stitches of braid pattern, 6 (11) 16 stitches of elastic, chrome. After 32 cm = 86 rub. close from the elastic for the armholes on both sides, 4 sts, in every 2nd p. 1 x 3, 3 x 2, 2 x1 l. and in the next 4th r. 1×1 l. = 115 (125) 135 p. After 58.5 cm = 158 r. (60 cm = 162 rub.) 61.5 cm = 166 rub. close from the elastic for shoulder bevels on both sides 8 (8) 10 p. and in every 2nd p. 3 X 9 (10) 11 p. Simultaneously, with the 1st decrease in the shoulder, close the middle 35 (37) 37 p. for the neckline and finish both sides separately. To round, close from the inner edge in every 2nd r. 1 x 3 (4) 4 and 1 x 2 p. After 60.5 cm = 164 r. (62 cm = 168 rub.) 63.5 cm = 172 rub. from the elastic, all loops must be used.

Before: knit the same way, but with a deeper neckline. For this, after 54 cm = 146 rubles. (55.5 cm = 150 rub.) 57 cm = 154 rub. from the elastic band close the middle 21 (23) 23 sts, in every 2nd p. 1 x A (5) 5.1 x 3.1 x 2 and 2 x 1 p. and in the next 4 p. 1 x 1 p.

Sleeves: cast on 69 (77) 85 sts and knit with an elastic band as follows: edge, 2 (1) 0 purl, 65 (70) 80 sts of elastic, repeat the rapport, finish 0 (1 knit, 1 purl ., knit 1.. purl 1) knit 1.. purl 1, knit 1, chrome. At the same time, from the cast-on edge, add sleeves for bevels on both sides alternately in every 4th and 6th r. 24 × 1 p. = 117 (125) 133 p., including added loops to the pattern. After 46 cm = 124 r. from the cast-on edge of the back for the sleeve roll on both sides, 3 stitches and in every 2nd row. 6 x 2, 5 x 1, 6 x 2.1 x 3 and 1 x 4 p. After 61 cm = 164 r. From the cast-on edge, bind off the remaining 39 (47) 55 sts.

Assembly: sew shoulder seams; Using circular knitting needles, cast on 86 (92) 92 sts along the neckline and knit 4 circular r. purl, then bind off the stitches. Sew in the sleeves, sew side seams and sleeve seams.

A man must have at least one jumper in his wardrobe. This versatile item goes great with both a formal office shirt and jeans. The main thing is to choose the right style and color. Knitted men's jumper patterns with descriptions presented in this article will help you decide on the model. Each model has detailed description and pattern diagrams.

Men's jumper with arans

Size: 48/50; 56/58.

We will need:

• yarn, consisting of: 55% wool, 33% acrylic, 12% cashmere (50g per 90m) – 800; 900g;
• straight knitting needles No5 and No5.5;
• circular knitting needles No. 5.5.

Patterns:

Density: 22p. for 22.5 rub. equal to 10 cm by 10 cm.

How to knit a men's jumper with arans - description and diagrams

Back

Using knitting needles No. 5, cast on 110; 128p. and knit special cutting to a height of 6 cm. Let's go to sp. No. 5.5 and knit a pattern with arans. Having completed 96r. (37.5cm); 86 rub. (33.5 cm) pattern with arans, closed. under the armholes on both sides 1 time in 3 stitches, then in every 2nd row. 2 times 2 p. and 2 times 1p. In total we have 92; 110p.

After 152r. (59.5 cm) from special. cutting to design the shoulder line, closing. on both sides 1 time 4 times; 5p. Then in every 2nd r. 2 times 4; 5p., 1 time 8; 9p.

At the same time, knitting 156 rubles. (61cm) from special. cutting closed for roll-out necks central 30; 36p. From now on, we will knit each of the parts separately. For a smooth transition along the inner edge of each of them, close. next row 1 time in 3 p. At an altitude of 160 rubles. (62.5 cm) closed. shoulder bevels from 8; 10p. every.

Before

We carry out according to the description of the back. The difference is in the deeper rollout. Having completed 130r. (51cm) from special. cutting closed central 16; 22p. For smooth rollout along the inner sides of each of the resulting parts, the front is closed. in every 2nd r. 1 time in 3 p., 2 times in 2 p., 3 times in 1 p.

Sleeves

Using knitting needles No. 5, cast on 48; 56p. and knit 6cm special. cutting At the same time, for the first solution we start with 1 chrome., 2i., * 2l., 2i., 2l., 3i.* - repeat from * to * three times, 2l., 2i., 2l., 2i., 1 chrome

Let's go to sp. No5.5 and continue to knit a men's jumper with aran pattern. At the same time, for the 1st solution we start with 1cr. and loops from arrow A. We perform P with arans twice, ending with loops to arrow B and 1 cr.

To create a bevel, add on both sides in every 8th r. and 10th p.m. from special cutting 12 times in 1 p.; in every 6th r. 17 times 1 p. according to the scheme. We get 72; 90p.

After 120r. (47r) from special. cutting to form a closed round. on both sides 1 time in 3 stitches, then in every 2nd row. for the 1st solution * 1 time in 2 p., 1 time in 1 p. * – from * to *
repeat 7 times, 1 more time in 2 p.; for the 2nd solution closed 17 times 2p. The remaining 14; 16p. closing in 156r. (61cm) from special. cutting

Assembling a jumper with arans

We sew the shoulders. We lift with circular knitting needles along the edge of the neckline 96; 108p. and knit 3cm
rubber bands. Closing loops according to the drawing. We sew in the sleeves. We make side and sleeve seams.

Men's raglan pullover on top: video mk

https://youtu.be/fiq0nX6gOD0

https://youtu.be/v3y5O9I1bWo

https://youtu.be/BS20fF5rJj8

Classic men's jumper

Sizes: 48-50; 52-54; 56-58.

We need:

• yarn, 50% fleece, 30% alpaca, 20% silk (50g per 100m) – 750; 800; 850g;
• sp. straight lines No4,5 and No5;
• sp. circular No. 4.5.

Patterns:

• elastic band: knit sp. No4.5 2l.x2i.;
• main pattern: knit sp. No5 according to the scheme.

Litsev. p diagrams are counted from right to left, purl. r. We count from left to right. Vertical repeat (P) of the pattern consists of 1p. 4 rubles each

Density: knitting needles No. 5 on the main pattern 18p. for 26 rub. will be 10cm by 10cm.

Description

Back

We start knitting a men's jumper with a set of knitting needles No. 4.5 102; 110; 114p. Next, we perform the cutting pattern, while distributing the loops as follows: 1 chrome., 1i., * 2l., 2i.* - from * to * repeat up to the 4 outermost stitches, 2l., 1i., 1 chrome .

Having completed 4cm of cutting, we move on to sp. No5 and further we knit the men's jumper with the main pattern. In his first r. add 1; 1; 3p., distributing the increase evenly.

• for size 48-50: 1 edge, start from mark A, repeat P 5 times, end at mark B, 1 edge;
• for size 52-54: 1 chrome, P repeat 6 times from mark C to mark D. Finish st after P, 1 chrome;
• for size 56-58: 1 cr., start from mark E, repeat P 6 times, end at mark F, 1 cr.

In total we got 103; 111; 117p.

Having knitted 50; 51; 52cm height of the part, close on both sides under the armhole 1 time, 4 stitches, then in every 2nd row. 7; 8; 8 times 1 p. 81 remain; 87; 93p.

Having received 70; 72; 74 cm height of the part, for rolling out the neck closed. central 27; 27; 29p. We will finish the resulting parts of the back separately.

For a smooth transition along the inner edge of the rollout for both parts, close. in every 2nd r. 1 time in 3 p., and 1 time in 2 p.

At altitude 72; 74; 76cm closed 22 each; 25; 27 remaining stitches making up the shoulder line.

Before

We perform it similarly to the back, but with a lower rollout. At altitude 63; 65; 67cm from 1st r. closing central 17; 17; 19p. and then we finish each part from a separate ball. We ensure smooth transitions by closing along the inner edge in every 2nd row. 1 time in 3 p., 1 time in 2 p., 5 times in 1 p.

On the river 72; 74; 76cm closed 22 each; 25; 27 remaining stitches making up the shoulder line.

Sleeves

Having completed 6cm of cutting, we move on to sp. No5 and further we knit the men's jumper with the main pattern. In his first r. add 3 p., distributing the increase evenly.

We knit the main pattern using the explanations below:

• for size 48-50: 1 cr., start from mark B, knit P 1 time, finish at mark A, 1 cr.;
• for size 52-54: 1 cr., P knit 1 time from mark F to mark E, 1 cr.;
• for size 56-58: 1 cr., start from mark G, repeat P 1 time, end at mark H, 1 cr.

In total we got 45; 49; 53p.

To expand, add 1 stitch in every 8th row, counting from the cut, on both sides 14 times, then in every 10th row. 2 times 1 p., and again in every 8th r. 12 times 1 p. In total we have 73; 77; 81p.

For the roll line at 53; 54; 55cm from the start of work closed. on both sides 1 time 4 p., then in every 2nd r. 18 times 1 p. and 2 times 2p.

Having received a height of 68; 69; 70cm from the first row, closed. 21; 25; 29 remaining sts.

We knit the second sleeve in the same way.

Assembly and finishing

Making a life-size jumper pattern. After slightly moistening the parts, fix them to the required sizes and let them dry. We connect the shoulders with a knitted seam. We sew in the sleeves. Sew side and sleeve seams.

To give a men's jumper a finished and neat look, let's tie the neckline. For this purpose
lift the front side of the product with circular knitting needles No. 4.5 along the edge of the rollout 112; 112; 120p. We knit 4 cm of elastic and close it. loosely loop according to the drawing.

Men's jumper - calculations and knitting: MK video

Selection of schemes

Pullover sizes:-a) 30-32 -b) 34-36 -c) 38-40 -d) 42-44.

You will need:

A) 16 -b) 17 -c) 19 -d) 20 skeins of yarn type MERINO SPORT beige color number 10;

Elastic band 3 x 3:

1st day: In persons r.: * 3 persons. p., 3 p. p., repeat from * to *.

2nd and all subsequent rows: Knit loops according to the pattern.

Fantasy pattern:

1st day: In persons r. (beginning of row): * K2. p., 2 p. p., repeat from * to *.

2nd and 4th rows: Knit loops according to the pattern.

3rd row: In persons r. (beginning of row): * P2. n., 2 persons. p., repeat from * to *.

Repeat these 4 rows constantly.

Sweater sizes: 48/50 and 52/54.

Data for size 52/54 are given in parentheses.

If only one value is specified, it applies to both sizes.

You will need: approximately 900 (1000) g of Mille yarn from Lana Crossa, color Natur number 17 (50% Merino extrafein, 50% Acryl); knitting needles No. 6 and 7.

Pattern for the strap: alternately 1 persons. p., 1 p. p.

Main pattern:

Persons smooth surface: Persons r. - persons p., out. r. - purl p.

Braid pattern: knit according to the diagram, which shows only persons. r.

In purl. rows of loops knit according to the pattern.

Pullover sizes: S/M/L/ХL_

You will need: 650/700/750/800 g terracotta (automne) yarn Bergere de France Pur Merinos Francais (100% merino wool, 120 m/50 g); knitting needles No. 3.5 and No. 4.5.

Facial surface: persons r. - persons p., out. r. - purl p.

Purl stitch: persons r. - purl p., out. r.- persons p.

Rubber: alternately knit 2, purl 2.

Fantasy pattern: the number of loops is a multiple of 4 + 1 p. Knit according to pattern 1.

Perform 1 time from the 1st to the 10th row, then repeat from the 3rd to the 10th row.

Braid A (at 15 p.): knit according to pattern 2. Repeat from 1st to 8th row.

Braid B (10 p.): knit according to pattern 2. Perform 1 time from 1st to 4th, then repeat 3rd and 4th rows.

Jacket size: 48.

Pullover size: 48/50, 52/54 and 56/58.

Data for size 48/50 is given before the bracket, for size 52/54 and 56/58 - before and after the slash in brackets. If one value is specified, it applies to all sizes.

Pullover size: 48/50 (52/54)

You will need: 750 (800) g of Qual Limbo type yarn (superwash wool - 100%, 125 m / 50 g) dark green (Fb 4501) from SCHOELLER + STAHL; straight knitting needles No. 3.5 and No. 4, as well as circular knitting needles No. 3.5.

Elastic band (on knitting needles No. 3.5): alternately 2 persons. p., 2 p. p.

Knit subsequent patterns on needles No. 4!

Persons smooth surface: persons r. knit faces p., out. r. - purl p.

Out. smooth surface: persons r. knit purl p., out. r. - persons p.

Garter stitch from faces. p.: face and back n. knit faces. p.

Size: 50-52

You will need: 750 g of yarn, knitting needles No. 5 and 6.

Elastic band 1 x 1 (knitting needles No. 5): 1 knit loop twisted, 1 purl loop.

Rice knitting (knitting needles No. 6): see diagram 1.

Irish knitting needles No. 6: see diagrams 2 and 3.

Knitting density: 18 p. x 20 r. rice knit = 10 x 10 cm.

Before: Cast on 77 stitches on size 5 needles and knit 10 cm of 1 x 1 ribbing. In the last row of ribbing, add 27 stitches evenly. You will receive 104 loops for the composition of motifs Irish knitting. Switching to knitting needles No. 6, knit 7 loops in rice stitch, then continue knitting according to pattern 2

Jacket size: 54

You will need: 700 g of beige yarn (wool with acrylic added) and 5 matching buttons, knitting needles No. 3 and 3.5.

Elastic 2 x 2: persons r.: alternately knit 2, purl 2; purl r.: according to the drawing.

Fantasy pattern: according to the scheme.

KNITTING DENSITY: 10 x 10 cm = 27 p. x 32 r. fantasy pattern.

Back: On knitting needles No. 3, cast on 158 stitches and knit 8 cm with a 2 x 2 rib. Continue knitting with knitting needles No. 3.5 in the pattern according to the pattern. At a height of 50 cm from the start of knitting, close the armholes on both sides with 4 sts, 3 sts, 2 sts and 3 times 1 st. At a total height of 72 cm, finish knitting.

Right shelf: On knitting needles No. 3, cast on 78 sts and knit 8 cm with a 2 x 2 rib.

The popularity of the polo pullover is understandable, so it needs to be knitted from blended yarn that has high-quality characteristics for long-term wear.

Size 46-48

You will need: 500 g melange yarn (“RAINBOW”, 30% wool, 70% acrylic; 100 g/300 m); knitting needles No. 3.5; zipper 15 cm long.

Elastic band: knit 2, purl 2.

Basic pattern: 16 rows - stockinette stitch, 4 rows - garter stitch(knit all rows with facial loops).

Knitting density: 17 p. x 20 r. = 10 x 10 cm.

Back:

Cast on 100 stitches and knit 3.5 cm with an elastic band, continue with the main pattern. At a height of 51 cm from the beginning, close the armholes on both sides with 5 sts (= 90 sts). At a height of 73 cm from the beginning, for the neckline, close off the middle 20 stitches and then finish both sides separately. To round the cutout, close with inside in every 2nd row, 1 time 3 sts and 2 times 2 sts. At a height of 75 cm from the beginning, close off the remaining 28 sts of the shoulder.

Before:

similar to the pig, but at a height of 62 cm from the beginning for the polo neckline, divide the loops in half (45 stitches each) and then finish both sides separately. After 5 cm to round the neckline, close from the inside in every 2nd row 1 time 6 sts, 1 time 4 sts, 1 time 3 sts, 1 time 2 sts and 2 times 1 st. At a height of 75 cm from began to close off the remaining 28 stitches of the shoulder.

Sleeve:

Cast on 50 stitches and knit 3.5 cm with an elastic band, continue with stockinette stitch. To expand, add 1 stitch on both sides in every 6th row 15 times (= 80 stitches). At a height of 53 cm from the beginning, close all loops. Knit the second sleeve in the same way.

Assembly:

Sew shoulder seams. For the collar, along the edge of the neckline, cast on 88 sts and knit in the following order: edge, knit 4, purl 2, 76 sts with rib, knit 4, edge. After 20 cm, on the outer 6 loops on both sides, knit strips with 5 cm stitch, bind off 76 central loops, then bind off the loops of the stripes.

Men's pullover with polo clasp knitted with description.

Dimensions: 46/48 (52/54) 58/60.

You will need: 850 (900) 950 g green and 50 (50) 100 g cream yarn (100% cotton, 125m / 50 g); circular knitting needles No. 3 and 3.5; 4 buttons.

Elastic band, needles No. 3: alternately knit 1, purl 1.

Knit all subsequent patterns with knitting needles No. 3.5.

Diamond braid, green thread: knit according to the pattern, start with the loops before the repeat, repeat the repeat loops and finish according to the pattern. Repeat from 1st to 32nd r.

Patterned stripe, green thread: knit like a braid from diamonds according to the pattern, just fill in 1 x from the 33rd to the 40th row, then repeat from the 35th to the 40th row.

Knitting density, diamond braid and patterned stripe: 28 or 26.5 p. and 35 r. = 10 x 10 cm.

How to knit men's pullover with polo clasp.

Before: cast on needles 162 (180) 198 sts - 2 chrome. cream thread and knit 7 cm with an elastic band, with the first row = purl row done with cream thread, 10 r. green, 2 r. cream and the remaining rows with green thread. Continue working with diamond braids. After 43.5 cm = 128 r. from the elastic, knit a patterned strip = 154 (171) 188 p. + 2 edges, after 44 cm from the cast-on edge, close on both sides for armholes 9 (17) 23 p. After 54 (54) 55 cm from the cast-on edge, close for the fastener middle 6 (7) 6 p. and finish both sides separately. After 64.5 (64.5) 65.5 cm from the cast-on edge, close from the inner edge in every 2nd r. 1 x 7, 1 (1) 2 x 3, 3 x 2, 2 x 1 p., in every 4th p. 1 x 1 p., bind off the remaining loops after 71 (71) 72 cm from the cast-on edge.

Back: knit as before, only without the vent. After 69.5 (69.5) 70.5 cm from the cast-on edge, close the middle 32 (33) 38 stitches for the neckline and from the inner edge in every 2nd r. 1 x 4 and 1 x 2 p.

Sleeves: cast on the knitting needles with a cream thread 60 sts + 2 chrome. and knit 7.5 cm with an elastic band in the sequence of colors as for the front, in the last row evenly add loops so that their number is 72 + 2 chrome. Continue working with diamond braids. For bevels, add 33 (33) 26 x 1 stitch on both sides in every 4th row. and 7 (7) 14 x 1 p. in every 2nd p., including added loops to the pattern. After 53 (56) 56 cm from the cast-on edge, close all the loops.

Assembly: perform shoulder seams; Along the edges of the slots, cast on the corresponding number of loops with green thread and knit 2.5 cm with an elastic band, close all the loops, while on the left side of the binding, 1 cm from the beginning of knitting the binding, evenly distributing, make 3 holes for buttons = 2 stitches. close, without knitting, and immediately cast them on again. Along the neckline and the edges of the vents, cast on the appropriate number of loops with a cream thread and knit 3 cm with an elastic band, close all the loops, and knit 1 r. cream, the remaining rows with green thread. After 1 cm from the start of knitting the binding, make 1 more hole for the button. Sew in sleeves, sew side seams and sleeve seams, sew on buttons.