36 (38/40) 42

You will need

Yarn (100% cotton; 130 m/50g) - 250 (250) 300g light gray ribbon; knitting needles No. 5 and 6; circular knitting needles No. 5.

Patterns and schemes

Purl stitch

Knitting in rows in forward and reverse directions = front rows - purl loops, purl rows - front loops;
in circular rows = purl all stitches.

Basic pattern

The number of loops is a multiple of 6 + 1 + 2 chrome.

Knit according to the given pattern. It contains front and partially back rows. In unspecified purl rows, purl all stitches.

Start with chrome. and loops before rapport, repeat repeat constantly, finish with loops after repeat and edge. Repeat in height from the 1st to the 12th row.

Knitting density

20p. x 19r. = 10 x 10cm.

Pattern

Completing of the work

Back

On needles No. 5, cast on 99 (105) 111 sts and for the twisted bottom bar, knit 1.5 cm = 3 p. purl satin stitch and 1 purl. row with purl loops.

Then switch to needles No. 6 and knit with the main pattern.

For all-knit sleeves every 21 cm = 40 rubles. (19cm = 36r.) 19cm = 36r. From the bottom bar on both sides, add 1 stitch 1 time according to the pattern, then 2 stitches in each. add according to the pattern 2 times 1 p.

In the next 2-mr. additionally cast on 1 time for 9 p. (include added loops in the pattern) = 123 (129) 135 p.

For a neck after 38 cm = 72 rubles. (38cm = 72r.) 40cm = 76r. from the bottom bar close the middle 51 stitches and finish both sides separately.

After 39cm = 74r. (39cm = 74r.) 41cm = 78r. from the bottom bar close the remaining 36 (39) 42 stitches.

Before

Knit like a back, but for a deeper neck already after 28.5 cm = 54 rubles. (28.5 cm = 54 rub.) 30.5 cm = 58 rub. from the bottom bar close the middle one 51p.

Assembly

Sew shoulder seams.

For the binding along the edge of the neckline, cast on 108 sts on circular needles and knit 3p in the round. purl stitch. Then knit all the stitches off.

For the sleeve strips, cast on 56 (62) 68 sts on the straight edges of the sleeves on circular needles and knit 3p in the round. purl satin stitch In the next purl. purl all the stitches in the row.

Sew side and sleeve seams, including the narrow edges of the trims.

Photo: Verena magazine. Special issue" No. 2/2017

Sweater with short knitted front

The original shape of this sweater is achieved by diagonally knitting sections of elastic.

DIMENSIONS

36/38 (40) 42/44

YOU WILL NEED

Yarn (48% polyester, 26% wool, 13% mohair, 8% polyacrylic, 5% polyamide; 100 m/50 g) - 400 (450) 500 g beige; knitting needles No. 6 and 7; circular knitting needles No. 6.

PATTERNS AND DIAGRAMS

RUBBER

Knit with needles No. 6 (odd number of loops). After casting on loops, start with 1 purl row: edge, alternately 1 purl, 1 knit, finish with 1 purl, edge. In the front rows, knit the loops according to the pattern.

Circular rows: alternately 1 knit, 1 purl.

Knit the following patterns using knitting needles No. 7.

PATENT RUBBER

The number of loops is a multiple of 4 + 1 + 2 edge loops.

Front rows: edge, * 1 patent loop (= 1 loop with 1 yarn over, slip as purl), 3 purls, from * constantly repeat, finish with 1 patent loop, edge.

Purl rows: edge stitch, * 1 patent loop (= knit a slipped double crochet stitch together with a purl stitch), knit 3, from * repeat constantly, finish with 1 patent loop, edge row.

"BRAID" PATTERN

The number of loops is a multiple of 8 = knit according to. scheme. It shows facial rows. In the purl rows, knit the loops according to the pattern, knit the yarn overs purl. Constantly repeat rapport and rows 1-10.

EMPHASIZED DECREASES

At the beginning of the row after the edge and at the end of the row before the edge, knit 2 loops together with a purl.

COLLAR PATTERN

Knit with needles No. 6 (the number of loops is a multiple of 4).

1st round: * 1 patent loop (= 1 loop with 1 yarn over, slip like a purl), purl 3, from * constantly repeat.

2nd round: 1 patent loop (= knit a slipped loop with a double crochet), purl 3, from * constantly repeat.

Constantly repeat the 1st and 2nd circular rows.

KNITTING DENSITY

14 p. x 22 r. = 10 x 10 cm, tied with patent elastic;
16 p. x 20 r. = 10 x 10 cm, knitted with a braid pattern;
32 stitches of braid pattern = 20 cm.

ATTENTION!

When knitting patent stitches in a knitted fabric, only every 2nd row is visible.

PATTERN

COMPLETING OF THE WORK

BACK

Cast on 63 (67) 71 stitches on the knitting needles and knit 3 cm = 7 rows with an elastic band for the placket.



After 57.5 cm = 126 rows from the bar, close for the shoulder bevel on both sides 1 x 3 (4) 5 p., then in every 2nd row 1 x 3 (4) 5 p. and 2 x 3 p.

After 61 cm = 134 rows from the bar, close off the remaining 39 sts, of which the middle 31 sts form the neckline, the outer 4 sts each form the shoulders.

Attention!

The front is shorter than the back.

The side corners with the bottom edge rounded upward, as well as the shoulder bevels, are formed due to the diagonal arrangement of the pattern on both sides of the “braid” pattern.

The dimensions on the front pattern were partially obtained by measuring the model.

BEFORE

Cast on 71 (75) 79 stitches on the knitting needles and for the placket knit 3 cm = 7 rows with an elastic band, while in the 1st purl row between the edges start and finish 1 knit stitch and in the last purl row in the middle add 1 loop = 72 (76) 80 P.

Continue working as follows: edge, 19 (21) 23 stitches with patent elastic, while starting and ending with 3 purls (1 patent loop) 1 purl, 32 stitches with a braid pattern, 19 (21) 23 stitches with patent elastic , as before, edge.

To place the pattern diagonally in each subsequent front row, subtract 1 stitch on both sides, simultaneously before and after the braid pattern, knit 1 knit or purl crossed thread from a transverse thread, according to. pattern and include it in the patent elastic. The number of loops remains unchanged!

After 45 cm = 90 rows from the bar (measure in the middle), bind off the middle 32 loops for the neckline and finish both sides separately, while continuing the rhythm of decreases and increases.

After 5.5 cm = 12 rows from the beginning of knitting the neck, close off the remaining 20 (22) 24 stitches of the shoulders.

SLEEVES

Cast on 31 (35) 39 stitches on the knitting needles for each sleeve and knit 3 cm = 7 rows with an elastic band for the placket.

Continue working with a patent rubber band.

To bevel the sleeves, add 6 x 1 sts on both sides in every 12th row from the bar. pattern = 43 (47) 51 p.

After 38 cm = 84 rows from the bar, close the sleeves on both sides with 1 x 2 p., then in every 2nd row 8 x 1 p.

After 46 cm = 102 rows from the bar, leave the remaining 7 (11) 15 stitches.

ASSEMBLY

Sew shoulder seams, slightly pressing the shoulder edges of the front.

Cast on 64 stitches on circular needles along the edge of the neckline and for the collar knit 5 cm = 12 circular rows with a collar pattern and 3 cm = 7 circular rows with an elastic band. Then close the loops like knit stitches.

Sew sleeves according to according to the size on the pattern, while pulling the edges of the sleeves tight. Sew side seams and sleeve seams, slightly stretching or seating the side edges of the front.

Photo: Sabrina magazine No. 9/2016

CROPPED FRONT SWEATER The original shape of this sweater is achieved by knitting sections of elastic diagonally. Sizes 36/38 (40) 42/44 You will need Yarn (48% polyester, 26% wool, 13% mohair, 8% polyacrylic, 5% polyamide; 100 m/50 g) - 400 (450) 500 g beige; knitting needles No. 6 and 7; circular knitting needles No. 6. Patterns and schemes Elastic band Knit with needles No. 6 (odd number of loops). After casting on loops, start with 1 purl row: edge, alternately 1 purl, 1 knit, finish with 1 purl, edge. In the front rows, knit the loops according to the pattern. Circular rows: alternately 1 knit, 1 purl. Knit the following patterns using knitting needles No. 7. Patent elastic The number of loops is a multiple of 4 + 1 + 2 edge loops. Front rows: edge, * 1 patent loop (= 1 loop with 1 yarn over, slip as purl), 3 purls, from * constantly repeat, finish with 1 patent loop, edge. Purl rows: edge stitch, * 1 patent loop (= knit a slipped double crochet stitch together with a purl stitch), knit 3, from * repeat constantly, finish with 1 patent loop, edge row. Pattern from "Braid" The number of loops is a multiple of 8 = knit according to. scheme. It shows facial rows. In the purl rows, knit the loops according to the pattern, knit the yarn overs purl. Constantly repeat rapport and rows 1–10. Emphasized decreases At the beginning of the row after the edge and at the end of the row before the edge, knit 2 loops together purlwise. Collar pattern Knit with needles No. 6 (the number of loops is a multiple of 4). 1st round: * 1 patent loop (= 1 loop with 1 yarn over, slip like a purl), purl 3, from * constantly repeat. 2nd round: 1 patent loop (= knit a slipped loop with a double crochet), purl 3, from * constantly repeat. Constantly repeat the 1st and 2nd circular rows. Knitting density 14 p. x 22 p. = 10 x 10 cm, tied with patent elastic; 16 p. x 20 r. = 10 x 10 cm, knitted with a braid pattern; 32 stitches of braid pattern = 20 cm. Attention! When knitting patent stitches in a knitted fabric, only every 2nd row is visible. Getting the job done Back Cast on 63 (67) 71 stitches and for the placket, knit 3 cm = 7 rows with an elastic band. Continue working with a patent rubber band. After 57.5 cm = 126 rows from the bar, close for the shoulder bevel on both sides 1 x 3 (4) 5 p., then in every 2nd row 1 x 3 (4) 5 p. and 2 x 3 p. Through 61 cm = 134 rows from the bar, close the remaining 39 sts, of which the middle 31 sts form the neck, the outer 4 sts each form the shoulders. Attention The front is shorter than the back. The side corners with the bottom edge rounded upward, as well as the shoulder bevels, are formed due to the diagonal arrangement of the pattern on both sides of the “braid” pattern. The dimensions on the front pattern were partially obtained by measuring the model. Before Cast on the knitting needles 71 (75) 79 loops and for the strap knit 3 cm = 7 rows with an elastic band, while in the 1st purl row between the edges, start and finish 1 knit and in the last purl row in the middle add 1 loop = 72 (76) 80 p. Continue working as follows: edge, 19 (21) 23 p. patent elastic, while starting and ending with 3 purls (1 patent loop) 1 purl, 32 p. with a braid pattern, 19 (21) 23 p. .patent elastic, as before, edge. To place the pattern diagonally in each subsequent front row, subtract 1 stitch on both sides, simultaneously before and after the braid pattern, knit 1 knit or purl crossed thread from a transverse thread, according to. pattern and include it in the patent elastic. The number of loops remains unchanged! After 45 cm = 90 rows from the bar (measure in the middle), bind off the middle 32 loops for the neckline and finish both sides separately, while continuing the rhythm of decreases and increases. After 5.5 cm = 12 rows from the beginning of knitting the neck, close off the remaining 20 (22) 24 stitches of the shoulders. Sleeves Cast on 31 (35) 39 stitches on the knitting needles for each sleeve and knit 3 cm = 7 rows with an elastic band for the placket. Continue working with a patent rubber band. To bevel the sleeves, add 6 x 1 sts on both sides in every 12th row from the bar. pattern = 43 (47) 51 p. After 38 cm = 84 rows from the bar, close the sleeves for piping on both sides with 1 x 2 p., then in every 2nd row 8 x 1 p. After 46 cm = 102 rows from the bar leave the remaining 7 (11) 15 sts. Assembly Sew the shoulder seams, slightly seating the shoulder edges of the front. Cast on 64 stitches on circular needles along the edge of the neckline and for the collar knit 5 cm = 12 circular rows with a collar pattern and 3 cm = 7 circular rows with an elastic band. Then close the loops like knit stitches. Sew sleeves according to according to the size on the pattern, while pulling the edges of the sleeves tight. Sew side seams and sleeve seams, slightly stretching or seating the side edges of the front. Photo: Sabrina magazine No. 9/2016

The original shape of this sweater is achieved by diagonally knitting sections of elastic.

DIMENSIONS

36/38 (40) 42/44

YOU WILL NEED

Yarn (48% polyester, 26% wool, 13% mohair, 8% polyacrylic, 5% polyamide; 100 m/50 g) - 400 (450) 500 g beige; knitting needles No. 6 and 7; circular knitting needles No. 6.

PATTERNS AND DIAGRAMS

RUBBER

Knit with needles No. 6 (odd number of loops). After casting on loops, start with 1 purl row: edge, alternately 1 purl, 1 knit, finish with 1 purl, edge. In the front rows, knit the loops according to the pattern.

Circular rows: alternately 1 knit, 1 purl.

Knit the following patterns using knitting needles No. 7.

PATENT RUBBER

The number of loops is a multiple of 4 + 1 + 2 edge loops.

Front rows: edge, * 1 patent loop (= 1 loop with 1 yarn over, slip as purl), 3 purls, from * constantly repeat, finish with 1 patent loop, edge.

Purl rows: edge stitch, * 1 patent loop (= knit a slipped double crochet stitch together with a purl stitch), knit 3, from * repeat constantly, finish with 1 patent loop, edge row.

"BRAID" PATTERN

The number of loops is a multiple of 8 = knit according to. scheme. It shows facial rows. In the purl rows, knit the loops according to the pattern, knit the yarn overs purl. Constantly repeat rapport and rows 1-10.

EMPHASIZED DECREASES

At the beginning of the row after the edge and at the end of the row before the edge, knit 2 loops together with a purl.

COLLAR PATTERN

Knit with needles No. 6 (the number of loops is a multiple of 4).

1st round: * 1 patent loop (= 1 loop with 1 yarn over, slip like a purl), purl 3, from * constantly repeat.

2nd round: 1 patent loop (= knit a slipped loop with a double crochet), purl 3, from * constantly repeat.

Constantly repeat the 1st and 2nd circular rows.

KNITTING DENSITY

14 p. x 22 r. = 10 x 10 cm, tied with patent elastic;
16 p. x 20 r. = 10 x 10 cm, knitted with a braid pattern;
32 stitches of braid pattern = 20 cm.

ATTENTION!

When knitting patent stitches in a knitted fabric, only every 2nd row is visible.

PATTERN

COMPLETING OF THE WORK

BACK

Cast on 63 (67) 71 stitches on the knitting needles and knit 3 cm = 7 rows with an elastic band for the placket.



After 57.5 cm = 126 rows from the bar, close for the shoulder bevel on both sides 1 x 3 (4) 5 p., then in every 2nd row 1 x 3 (4) 5 p. and 2 x 3 p.

After 61 cm = 134 rows from the bar, close off the remaining 39 sts, of which the middle 31 sts form the neckline, the outer 4 sts each form the shoulders.

Attention!

The front is shorter than the back.

The side corners with the bottom edge rounded upward, as well as the shoulder bevels, are formed due to the diagonal arrangement of the pattern on both sides of the “braid” pattern.

The dimensions on the front pattern were partially obtained by measuring the model.

BEFORE

Cast on 71 (75) 79 stitches on the knitting needles and for the placket knit 3 cm = 7 rows with an elastic band, while in the 1st purl row between the edges start and finish 1 knit stitch and in the last purl row in the middle add 1 loop = 72 (76) 80 P.

Continue working as follows: edge, 19 (21) 23 stitches with patent elastic, while starting and ending with 3 purls (1 patent loop) 1 purl, 32 stitches with a braid pattern, 19 (21) 23 stitches with patent elastic , as before, edge.

To place the pattern diagonally in each subsequent front row, subtract 1 stitch on both sides, simultaneously before and after the braid pattern, knit 1 knit or purl crossed thread from a transverse thread, according to. pattern and include it in the patent elastic. The number of loops remains unchanged!

After 45 cm = 90 rows from the bar (measure in the middle), bind off the middle 32 loops for the neckline and finish both sides separately, while continuing the rhythm of decreases and increases.

After 5.5 cm = 12 rows from the beginning of knitting the neck, close off the remaining 20 (22) 24 stitches of the shoulders.

SLEEVES

Cast on 31 (35) 39 stitches on the knitting needles for each sleeve and knit 3 cm = 7 rows with an elastic band for the placket.

Continue working with a patent rubber band.

To bevel the sleeves, add 6 x 1 sts on both sides in every 12th row from the bar. pattern = 43 (47) 51 p.

After 38 cm = 84 rows from the bar, close the sleeves on both sides with 1 x 2 p., then in every 2nd row 8 x 1 p.

After 46 cm = 102 rows from the bar, leave the remaining 7 (11) 15 stitches.

ASSEMBLY

Sew shoulder seams, slightly pressing the shoulder edges of the front.

Cast on 64 stitches on circular needles along the edge of the neckline and for the collar knit 5 cm = 12 circular rows with a collar pattern and 3 cm = 7 circular rows with an elastic band. Then close the loops like knit stitches.

Sew sleeves according to according to the size on the pattern, while pulling the edges of the sleeves tight. Sew side seams and sleeve seams, slightly stretching or seating the side edges of the front.

36/38 (40) 42/44

You will need

Yarn (48% polyester, 26% wool, 13% mohair, 8% polyacrylic, 5% polyamide; 100 m/50 g) - 400 (450) 500 g beige; knitting needles No. 6 and 7; circular knitting needles No. 6.

Patterns and schemes

Rubber

Knit with needles No. 6 (odd number of loops). After casting on loops, start with 1 purl row: edge, alternately 1 purl, 1 knit, finish with 1 purl, edge. In the front rows, knit the loops according to the pattern.

Circular rows: alternately 1 knit, 1 purl.

Knit the following patterns using knitting needles No. 7.

Patent gum

The number of loops is a multiple of 4 + 1 + 2 edge loops.

Front rows: edge, * 1 patent loop (= 1 loop with 1 yarn over, slip as purl), 3 purls, from * constantly repeat, finish with 1 patent loop, edge.

Purl rows: edge stitch, * 1 patent loop (= knit a slipped double crochet stitch together with a purl stitch), knit 3, from * repeat constantly, finish with 1 patent loop, edge row.

Braid pattern

The number of loops is a multiple of 8 = knit according to. scheme. It shows facial rows. In the purl rows, knit the loops according to the pattern, knit the yarn overs purl. Constantly repeat rapport and rows 1–10.

Emphasized decreases

At the beginning of the row after the edge and at the end of the row before the edge, knit 2 loops together with a purl.

Collar pattern

Knit with needles No. 6 (the number of loops is a multiple of 4).

1st round: * 1 patent loop (= 1 loop with 1 yarn over, slip like a purl), purl 3, from * constantly repeat.

2nd round: 1 patent loop (= knit a slipped loop with a double crochet), purl 3, from * constantly repeat.

Constantly repeat the 1st and 2nd circular rows.

Knitting density

14 p. x 22 r. = 10 x 10 cm, tied with patent elastic;
16 p. x 20 r. = 10 x 10 cm, knitted with a braid pattern;
32 stitches of braid pattern = 20 cm.

Attention!

When knitting patent stitches in a knitted fabric, only every 2nd row is visible.

Pattern

Completing of the work

Back

Cast on 63 (67) 71 stitches on the knitting needles and knit 3 cm = 7 rows with an elastic band for the placket.

After 57.5 cm = 126 rows from the bar, close for the shoulder bevel on both sides 1 x 3 (4) 5 p., then in every 2nd row 1 x 3 (4) 5 p. and 2 x 3 p.

After 61 cm = 134 rows from the bar, close off the remaining 39 sts, of which the middle 31 sts form the neck, the outer 4 sts each form the shoulders.

Attention!

The front is shorter than the back.

The side corners with the bottom edge rounded upward, as well as the shoulder bevels, are formed due to the diagonal arrangement of the pattern on both sides of the “braid” pattern.

The dimensions on the front pattern were partially obtained by measuring the model.

Before

Cast on 71 (75) 79 stitches on the knitting needles and for the placket knit 3 cm = 7 rows with an elastic band, while in the 1st purl row between the edges start and finish 1 knit stitch and in the last purl row in the middle add 1 loop = 72 (76) 80 P.

Continue working as follows: edge, 19 (21) 23 stitches with patent elastic, while starting and ending with 3 purls (1 patent loop) 1 purl, 32 stitches with a braid pattern, 19 (21) 23 stitches with patent elastic , as before, edge.

To place the pattern diagonally in each subsequent front row, subtract 1 stitch on both sides, simultaneously before and after the braid pattern, knit 1 knit or purl crossed thread from a transverse thread, according to. pattern and include it in the patent elastic. The number of loops remains unchanged!

After 45 cm = 90 rows from the bar (measure in the middle), bind off the middle 32 loops for the neckline and finish both sides separately, while continuing the rhythm of decreases and increases.

After 5.5 cm = 12 rows from the beginning of knitting the neck, close off the remaining 20 (22) 24 stitches of the shoulders.

Sleeves

Cast on 31 (35) 39 stitches on the knitting needles for each sleeve and knit 3 cm = 7 rows with an elastic band for the placket.

Continue working with a patent rubber band.

To bevel the sleeves, add 6 x 1 sts on both sides in every 12th row from the bar. pattern = 43 (47) 51 p.

After 38 cm = 84 rows from the bar, close the sleeves on both sides with 1 x 2 p., then in every 2nd row 8 x 1 p.

After 46 cm = 102 rows from the bar, leave the remaining 7 (11) 15 stitches.

Assembly

Sew shoulder seams, slightly pressing the shoulder edges of the front.

Cast on 64 stitches on circular needles along the edge of the neckline and for the collar knit 5 cm = 12 circular rows with a collar pattern and 3 cm = 7 circular rows with an elastic band. Then close the loops like knit stitches.

Sew sleeves according to according to the size on the pattern, while pulling the edges of the sleeves tight. Sew side seams and sleeve seams, slightly stretching or seating the side edges of the front.