How to tie a St. George's ribbon step by step. How to beautifully tie a St. George ribbon: the best ways with photos. What does the St. George ribbon symbolize?

Maria Zakharova

A woman devoid of good taste will look tasteless even in a stylish dress.

Content

Look closely at the narrow ribbon, consisting of three black and two orange stripes, associated with the smoke and flames of battle. It appeared in our state back in 1769 along with the Order of St. George. For modern Russians, it serves as a symbol of victory in the Great Patriotic War. Expressing boundless respect for veterans and grief for the fallen defenders of the fatherland, before May 9, we decorate our clothes with St. George ribbons.

Ways to beautifully tie a St. George ribbon

Before Victory Day, taking a small piece of paper in our hands, we get a little lost and think about how to tie a ribbon beautifully, we scroll through all sorts of options to make it look beautiful and solemn. There are no clearly defined rules here. There are many ways to tie a victory symbol. By showing your imagination, you can easily invent your own, exclusive method and create an elegant bow with your own hands.

Loop or tick

We invite you to familiarize yourself with the most in a simple way tying the St. George ribbon, accessible to everyone.

Place the ribbon in front of you on the table.
Fold it in half.
Pull one end up to make it shorter.
Pull it a little to the side. It turned out to be a tick.
To create a loop, move the end on top of the ribbon slightly upward. The loop should not be large, but not too small.

Simple bow

You don't know how to tie a St. George's ribbon with a bow? There's nothing complicated about it. The method of tying the St. George ribbon in the form of a bow is often used by schoolchildren and veterans, and does not require any special skills.

Using the above method we make a large loop.
On the other side we make the same loop.
Cross both sides of the ribbon in the middle and secure with a pin.

Elegant bow

Do you want to tie the St. George ribbon in a special, elegant and beautiful way? Then turn a simple bow into an elegant one.

Form a simple bow.
Tie the middle of the bow with an elastic band.

Butterfly

The St. George ribbon in the form of a motley butterfly will certainly attract admiring glances. With a little skill, you'll be creating this masterpiece in just a few minutes.

It will be inconvenient to knit a butterfly while hanging, so place the ribbon over some object that imitates a neck (pencil, finger). Make one end slightly longer than the other.
Cross the ends, the long one should be on top of the short one.
Pass the long end through the loop from bottom to top.
Fold the short end in half to create a bow.
Pull the long end through the loop and place it over the resulting bow.
Fixing the bow tightly with your fingers, fold the long end in half, then thread it through the loop at the back.
Straighten the ends of the bow by pulling them to the sides.

Tie

The St. George ribbon in the form of a small tie looks very beautiful. If this is not your first time tying a man’s tie, you will easily cope with this task.

Wrap the ribbon around the base so that the right end is longer than the left.
Place the right end over the left and run crosswise under it.
Wrap the right end around the left end again and thread it through the loop from bottom to top.
After pulling the end out of the loop, thread it through the resulting eyelet and tighten the tie.

Lightning

You have often seen a St. George's ribbon on the lapel of a jacket that looks like a lightning bolt. But you don’t even realize how easy it is to make it.

Without cutting the tape, fold it in thirds.
Stretch the top end to the left and the bottom to the right.
Pin the zipper to the garment at the folds.

Letter "M"

This method is very similar to the previous one.

Fold the St. George ribbon in four and place it on the table.
Stretch the top end to the left and the bottom to the right to form a kind of letter “M”.
Attach the resulting letter with pins to your clothing.

How and where best to attach the St. George ribbon

Before the Great Victory Day, we are given the famous St. George ribbons so that we can wear them with pride for our fatherland. This must be done consciously, and not by imitating others. Experience shows that not all people know how to tie the St. George ribbon correctly. What you are holding in your hands is not a fashion accessory, but a symbol of military valor, so it is not woven into your hair, attached to a skirt or trousers, or attached to a bag. It should be in the upper part of the body, on the left side, closer to the heart.

The origin of the St. George ribbon goes back to the distant 18th century. But during the Soviet Union it experienced its rebirth, becoming part of the Order of Glory in 1943. This order was awarded to warriors who proved themselves to be true heroes of the Great Patriotic War who accomplished the feat. And after the end of the battle, the St. George ribbon with a carnation became an invariable symbol of victory over Nazi Germany.

If you were given a St. George's ribbon on the eve of the holiday, think carefully about where you will place it. Mostly it is attached to a jacket or dress in the area where veterans wear medals, that is, on the left side of the chest. A brooch made of satin St. George ribbons, made in the kanzashi style, also looks beautiful here. It is allowed to wear the attribute on the wrist; it is tied with a double knot. Drivers place colorful bows inside the car interior, or attach them to a mirror or antenna.

Do not use St. George's ribbon as a hair tie or shoe lace. Don't tie it to your pants belt or your dog's collar. At the very least, this is not ethical, and by and large it is disrespect for the memory of the soldiers who defended their homeland from the Nazis and gave their lives for the happy future of their children and grandchildren. Treat the symbol with respect and explain the meaning of the St. George ribbon to the younger generation.

Video instruction: how to tie a St. George ribbon

Watch the people present at the Victory Parade. True Russian patriots wear St. George ribbons, and they are tied in a wide variety of ways - with a bow, a flower, a star, a nine, a serpentine. You won’t be able to make such a ribbon yourself; it’s better to buy it at a printing house or a sewing supply store. Well, anyone can tie it in an original way with a little effort and imagination.

How to beautifully tie a bow or make a zipper from a St. George ribbon is described on many sites on the Internet, and even special diagrams and video lessons are provided. We have prepared one such master class especially for you. We recommend working through several lessons, practicing on your own, and then the question of how to properly handle the symbol of military glory will disappear for you once and for all.

Photo of originally tied St. George ribbons

A beautifully, unconventionally tied St. George's ribbon attracts the attention of others and makes you stand out from the crowd. Originality has always adorned a person. But the whole secret is that it doesn’t really matter how you tied the St. George’s ribbon. If pride in your fatherland reigns in your heart and great gratitude to the veterans of the Great Patriotic War for their feat of arms, the very presence of this attribute on clothing will significantly enhance the atmosphere of the holiday and raise the patriotic spirit.

Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!

Discuss

How to tie the St. George's ribbon correctly

The St. George's Ribbon got its name back in 1769 (and not since the Second World War, as many people think) when Catherine II introduced the highest army award, the St. George's Cross. But even then, the tape reasonably had only two colors and exactly 5 stripes. It is generally accepted that these colors convey the life of St. St. George the Victorious and embody resurrection and death. According to legend, Saint George died 3 times and was resurrected 2 times.

Recently, it has become popular to wear a bow from the St. George's ribbon on the eve of Victory Day. If you want to make it at home yourself, then there are no difficulties in tying the St. George’s ribbon.

How to tie a St. George's ribbon? Diagram with possible methods:

10 ways to tie the St. George Ribbon (video lesson):

How to tie the St. George Ribbon - 6 main methods (photos step by step):

General attention is presented to ways of tying a classic bow from the St. George ribbon to wear on a sweater or other clothing on the chest.

1. The most easy way To tie a St. George's ribbon is to make a loop where one end is shorter than the other.

2. To make a bow, we make a large loop and connect its middle to the place where the ribbons cross.

3. We make a bow as in the previous version, only we fasten the middle with an elastic band.

4. Bend the ribbon in half, shorten one end and shape it into a checkmark.

5. Fold the ribbon in three to make one strip, then stretch the upper end to the right.

6. Bend the ribbon in four, then stretch the upper end to the right, and the lower end to the left. To make the letter "M".

How to wear the St. George's ribbon correctly, without defaming the symbol?

The tied St. George's ribbon is worn on the left side of the chest near the heart or tied in a double knot around the sleeve or on the wrist. We should not forget that the St. George ribbon is not an element of style, but a symbol of respect and pride for the feat of our ancestors, that everything said about the war is not forgotten by us and remains in a secluded corner of the heart, and patriotism for the Motherland was passed on to us with mother’s milk. Today, every person who has tied the St. George’s Ribbon is another small symbol of the great victory over Nazi Germany.

Why is the St. George's Ribbon needed in modern times?

Currently, the St. George's Ribbon is a charitable public event dedicated to Victory Day in the Great Patriotic War. Since 2005, the organizers have determined the goal of this action is “... at all costs, not to let new generations forget who and at what cost won the most terrible war of the last century, whose heirs we remain, what and who we should be proud of, who to remember...”.

It’s very annoying to see people who came up with the idea of tying a St. George’s ribbon instead of laces or a belt, attach it to the collar of their pets. This is not just a fictitious symbol of the holiday. The ancestors had to earn the right to wear the St. George Ribbon, as well as be awarded the Order of St. George. Therefore, we should not forget the true purpose of this ribbon as the highest military award of the Russian Empire and treat it and the memory of our grandfathers and great-grandfathers with reverence and respect. It is necessary to respect those who fell on the battlefield, who gave everything for the victory of the Motherland.

The public event “St. George’s Ribbon” in honor of the victory in the Great Patriotic War was first held in 2005 on the initiative of the RIA Novosti news agency. This symbol appeared in the era of Catherine II, who established the highest military award of the Russian Empire - the Order of St. George. The RIAMO in Podolsk columnist found out how to wear the St. George ribbon correctly and where not to attach it.

History of the St. George Ribbon

The St. George's ribbon appeared in 1769 by decree of Empress Catherine II, who introduced the soldier's Order of St. George the Victorious. This was a very honorable and prestigious award; it was received by military personnel for special bravery in battle. The colors of the stripes symbolized the battle: black - thick smoke, orange - bright flames. During the times of the Russian Empire, the ribbon was worn on the uniform, thrown over the right shoulder.

The film is named after St. George the Victorious, an important Christian saint who, according to legend, performed many miracles and defeated the terrible serpent that devastated the earth. His feat is depicted on Russian coins and on the coats of arms of Moscow and the Moscow region.

The St. George Ribbon was used to decorate Soviet awards, including the Order of Glory and the medal “For Victory over Germany in the Great Patriotic War of 1941-1945.” It had five longitudinal stripes - three black and two orange.

In 2005, the public action “St. George’s Ribbon” was held for the first time in the Moscow region, organized by the RIA Novosti news agency and the regional public organization “Student Community”. Since then, the event has been held annually not only in Russia, but also in other countries. St. George's ribbons have become a symbol of memory of the Great Patriotic War, the feat of veterans and Victory.

Where to get the St. George Ribbon

Photo of the site "St. George's Ribbon"

Volunteers and activists begin distributing ribbons a few days before the Victory Day celebrations. They can be found near metro stations, shopping centers, squares and crowded places. Anyone can receive the tape for free.

How to wear the St. George's ribbon

Alexander Kozhokhin

There are no official rules for wearing the St. George ribbon. However, it should be understood that this is not a fashion accessory, but a sign of memory, respect, grief and gratitude to the participants of the Great Patriotic War. Therefore, you should treat the ribbon with care and respect.

Basic methods

It is customary to wear the St. George ribbon on the chest on the left as a sign that the feat of Soviet soldiers remains forever in the hearts of descendants. It can also be tied around the wrist; many people attach the ribbon to a mirror or car antenna.

Loop

A simple and common option is to attach a St. George ribbon in the form of a loop. To do this, you need to cut 10-15 centimeters of the ribbon, cross the ends in the form of the letter “X” and pin the middle with a brooch, pin or badge. Wear on the left side of the chest.

Bow

You can attach the St. George ribbon in the form of a simple bow. It can be tied in any usual way, the main thing is to straighten the knot, “ears” and ends of the ribbon. You can also not tie the ribbon, but simply form two loops out of it and secure them in the middle with a pin or badge.

Figure eight bow

Take about 30 centimeters of tape, fold it into a figure eight, and secure it in the middle. Take a shorter ribbon and also fold it into a figure eight and secure it. Next you need to take two more tapes, each smaller than the previous one. You will get four ribbons different lengths, folded in figures of eight. Stack them on top of each other and fasten them with another ribbon. You will get a large but discreet bow, which should be secured on the left side of the chest.

Zigzag

The St. George ribbon can be attached to clothing in the form of a zipper or a zigzag. To do this, fold the tape three times like an accordion and pull the ends a little to form the letter “N”. Secure with pins or sew. Attach to clothing with a pin, brooch or badge.

Tie

To tie a St. George's ribbon and tie, you will need a long ribbon. You can use any usual method of tying a tie. For example, wrap the ribbon in a circle so that the left end is longer. Place the right end over the left and pass crosswise under it. Then wrap the ends again, forming a loop, into which you thread the left edge from bottom to top and pull it out of the loop, thread it through the eyelet and tighten.

Star

Alexander Kozhokhin

A more complex method, but the result looks original and festive. You will need 5 pieces of tape 8 centimeters long. Fold each in half and cut at an angle, 2 centimeters from the edge. Place the cut sides facing each other, fasten with fire - matches or a lighter. Turn the pieces inside out so that the seam is in the middle. Fasten them together with fire or a soldering iron - you get a star with a hole on the back side. Next, fold the standard length ribbon in the form of a check mark and place a star on the fold, attaching it to the center decorative element- for example, an icon. You can secure the decoration to your clothes with a safety pin.

Chrysanthemum

Prepare flower templates and trace them on a wide ribbon. Large and small blanks are best cut with curly scissors. To make a petal, you need to fold the cut out parts in the form of an accordion and steam them with an iron. Then drip glue onto the wire bent into a loop and put on the petals one by one, alternating large and small, as in a living flower. This chrysanthemum can be worn on clothes during Victory Day or used as decoration for a postcard for veterans.

With embroidery

In many schools, on the eve of May 9, schoolchildren embroider stars, flowers, dates, and inscriptions on St. George’s ribbons. Regular colored threads, floss, and special embroidery ribbons are suitable for this.

What not to do with the St. George ribbon

Attach tape to hair, shoes, pants;

Tie a ribbon on bags, backpacks, wallets;

Attach the ribbon to jewelry, watches, use as a necklace and accessory;

Attaching too many ribbons to clothing;

Tie more than one ribbon on the machine;

Attach the tape to animals and their clothing, use it as a collar or leash;

Sell St. George ribbons.

Tatiana Vorontsova

When the celebration of Victory Day is over, do not throw away the St. George ribbon. Left on the streets, thrown into the mud, or thrown into trash bins, the ribbons leave a painful impression and upset the veterans, but the action is aimed at ensuring that their feat is not forgotten.

It is best to remove the St. George ribbon until next year or wear it on special dates - for example, on the day the Great Patriotic War began or on the day the Battle of Stalingrad ended.

Methods of tying the St. George's ribbon, diagrams and step-by-step instructions.

Victory Day is an exciting holiday for veterans and their descendants. It evokes a sea of emotions in the heart - gratitude, reverence, respect, remembrance, admiration
A special feeling of belonging to the Victory Day is given by the St. George Ribbon, which adorns our clothes or flies in the form of flags around the city.
It has already become a good tradition to tie the St. George ribbon in the form of loops and bows, intricate stars, zigzags and flowers and proudly wear it on the left chest on Victory Day
What are the most common options for tying the St. George ribbon and will be discussed in this article

How can you beautifully tie a St. George's ribbon?

options for beautifully tied St. George ribbons

The concept of beauty, applicable to tying the St. George ribbon, is relatively
Since this ribbon is one of the main symbols of the Great Victory, the very fact of its presence on a jacket or blouse evokes emotions that are an order of magnitude higher than ordinary fashionable beauty
Nevertheless, we, women, great needlewomen and sorceresses who transform the whole world around us, have come up with many variations of tying this sign of Victory

Conventionally, all methods can be divided into three groups:

simple
a little more complicated
handmade masterpieces

The first group includes a loop, a tick, a knot, a simple bow
For the second - in the form of a zigzag, the letter “m”, a bow in 2 or more layers, a tie, a spiral
Still others are roses, stars, leaves, compositions with stones and beads, brooches and in the form of a tree branch

Note that the second and third groups of methods for tying a ribbon have opponents. They consider them a mockery of the symbol of valor and courage.

Although they respond more radically to the manner of wearing the St. George Ribbon in hair, shoes, on pets, cars and motorcycles, belts, and pants.

How to tie a St. George's ribbon with a bow?

beautiful bow from the St. George ribbon on a background of white pebbles

The classic St. George ribbon bow is simple to make:

put the tape, fix the middle with your finger
alternately lay out the free ends of the tape so that loops are formed on both sides
Secure the intersection of the loops and the free ends of the ribbon with a safety pin or a small appropriate brooch. A thread with beads or larger balls, which should be attached in the center of the product, will give the bow a special originality.

Make a strict bow from a ribbon longer than the standard one, which is distributed on Victory Day. To create such a bow you need:

St. George ribbon on a roll
glue gun or stapler
lighter
scissors

Fold a piece of tape 12-14 cm long in half so that its ends meet exactly in the middle of the tape and proceed as follows:

secure them with a stapler or glue
wrap the tape perpendicular to the joint, cut it off the roll and glue the ends of this piece of tape
Fold a regular ribbon in half and move the tails to the sides to form the letter “l”
Attach the check mark to the back of the bow with glue or a stapler

A multi-layer bow is suitable for fluffy blouses. To make it, prepare:

solid tape in a reel
scissors
matches
glue or stapler
to decorate the middle of the bow - a brooch with a bead, stone or a beaded ring.

Your imagination may suggest other decor options.

Lay out loops from the tape in the form of figure eights, lying on top of each other, which become smaller from layer to layer. For example, the first is 15 cm long, the second is 12, the third is 9. Three layers are enough for this type of bow
Cut the ribbon and burn the end with a match.
In the middle, connect all the ribbons together with glue, a stapler, a brooch, beads or a small piece of ribbon from a spool. In the last version, glue its ends to the back of the bow
You can leave the finished decoration unchanged or add a standard length St. George's ribbon, folded in the form of a check mark, so that the tails hang from the bow at the bottom
Attach finished bows to clothes with safety pins

How to tie a St. George's ribbon with a tie?

different ties on a clothesline

An interesting option for those who want to attract more attention to their person.

In order to tie the symbol of the Victory Day in the form of a tie, you need a piece of ribbon equal in length to the tie if it will be worn by an adult.

The technique is similar to tying a tie:

throw the ribbon around the base or neck so that the right end for you is longer than the left
wrap the long part of the ribbon around the short one from top to bottom and bring it out diagonally
then insert the working right end of the tape from bottom to top into the ring on the neck/base and bring it out diagonally to the left
wrap it around the stationary part of the tape again and guide it from bottom to top into the ring
tuck the working end into the knot that you have already wound around your neck and pull it down
tie ready

For clarity, here is a diagram of tying a classic tie.

tie tying pattern

How to tie a St. George's ribbon with a star?

The star is another symbol of victory. And many awards have a similar form.

Remembering that even under Peter 1, the presence of a St. George ribbon on a uniform was equivalent to a medal, we can adopt this tradition of tying it in the form of a star and attaching it to a jacket instead of awards.
Let's consider several implementation techniques:

simple
handmade

To tie a St. George's ribbon in the shape of a star using a simple technique, you need a ribbon and dexterous hands.

Fold it with a tick and unfold it on your palm as a “more” sign. In this case, the bottom of the tape should be in front of you
Tuck it over the end of the ribbon, which is located behind the fold
You now have a trapezoid with the longer side at the top, above which are the two ends of the tape.
Secure the left and middle trapezoid with your thumb
Thread the right one into the knot, which you hold with your finger.
Straighten the pentagon and attach it to the clothes with a pin

To give the shape of the star of St. George's ribbon using a handmade method, you need:

tape in reel
scissors
matches/lighter
soldering iron/glue gun
ruler
decorative element to decorate the middle of the star

Fold each in half and cut at an angle, departing 2 cm from one edge. The result is a trapezoid with dimensions of parallel sides of 4 and 8 cm
Roll each trapezoid with the cut sides facing each other and secure with matches/lighters or a soldering iron.
Turn all five pieces inside out so that the seam is in the middle and directed towards you
Fasten each workpiece together with fire or a soldering iron.
This way you will assemble a star, which will have a hole on the back side
Lay out a standard length ribbon in the form of a checkmark and place a ribbon star on the fold, in the center of which attach a decorative element, for example, a badge with a star
Place the jewelry on your clothes, securing it with a safety pin or a regular pin.

How to tie a St. George's ribbon with a rose?

different variations of the St. George ribbon, tied in the form of roses

An original and floral way of tying the St. George Ribbon is in the form of a rose.

It's quite simple to do. You need:

tape in reel
needle with black or brown thread
scissors
glue or matches/lighter
for decoration of the rose core - bead, badge, pebble

Proceed like this:

Cut a piece of tape 10 cm long
On one side, string it along the entire length with a thread and pull it together to make a rose.
The free edges of the tape can be carefully sewn or glued/cauterized
Fold a standard length ribbon with a tick and secure it on the back of the rose with threads/pins
Decorate the center of the flower if desired.
Attach the finished ribbon in the shape of a rose to the clothing in the heart area with a pin.

How to tie a St. George's ribbon with a flower, diagram

Scheme for tying a flower from a ribbon

How to tie a St. George's ribbon step by step?

tying the St. George ribbon with your hands

Above was a detailed description of the step-by-step tying of the St. George ribbon in different ways.

Let's add a few more.
Quick bow.

Gather the ends of the tape and fold it so that they are in the middle on the back side
Take a loop with each hand and tie them together into one knot.
Straighten the edges of the bow and attach it to your clothes.

The letter "m" means "May".

Fold the ribbon in the form of two figure eights lying on top of each other, so that one end of the ribbon is under them and the other is on top
Gently spread the fabric strips at the folds to form

Beautiful letter "m".

Secure both folds with safety pins and attach to clothing.
It is advisable to also secure the ends of the tape so that they do not blow in the wind

How to tie a St. George's ribbon on a car?

A St. George's ribbon is tied to a rear view mirror in a car. A St. George's ribbon is tied to a man's bag.

Although tying the St. George ribbon on bags has many opponents, on the streets on the holiday you will see many women and girls who practice it.

The most common methods are:

loop
nodule
check mark
bows of different types
flowers

Since the female part of humanity loves to dress up and decorate the world around them, they come up with many variations of tying the St. George ribbon.

They are helped by various handicraft techniques, for example, kanzashi, beads, crocheting and knitting.

Video: 10 ways to beautifully tie the St. George Ribbon

The St. George ribbon, as a rule, is worn on a holiday as a tribute to past events. Most often, a simple loop is made from it and attached to clothing, or even tied to the handle of a bag. But there are other options, for example, you can make a bow from a beautiful St. George’s ribbon quickly and easily with your own hands, turning it into a beautiful holiday accessory. ABOUT in various ways making such a memorable decoration will be discussed in this article.

Making a bow from St. George's ribbon with your own hands

In this version, we fold the tape into a loop, then pull the upper free end to the overlap. Before attaching to clothing, the center of the bow can be secured with threads to prevent the structure from falling apart.

The next method is a little more complicated; such a bow will be made from three pieces of ribbon.

First you need to decide on the size of the bow and cut two ribbons, the length of which will be twice as long. Also prepare a short piece of ribbon.

Step-by-step instruction:

1) Cut out corners on both sides of one of the long ribbons. We process all the edges with a lighter.

2) Fold the second tape in half so that the junction of the ends falls in the middle of the folded workpiece from below. Secure with thread or glue.

3) We wrap a short piece of tape around the workpiece in the center and secure it on the back side.

4) Fold the tape with the corners into the letter “L” and attach it from the inside out.

For this option you will need two 45 cm ribbons and one small one.

Stages of work:

1) Fold the long ribbon, connecting the edges. We squeeze the sides of the circle so that we get a “figure eight”. We secure the result with a pin.

3) We wrap a short piece of ribbon around the center of the bow and fasten it on the back side.

4) From the remaining tape we form a loop, which we attach from the inside to the center at the crossing point.

Manufacturing stages:

1) We lay a part of the tape 40 cm long on the surface, holding the rest to the hand.

2) We form the second layer in the opposite direction, measuring about 20-25 cm.

3) We continue to fold the tape in a zigzag pattern so that each new layer is 4-5 cm shorter than the previous one.

4) Finally, leave a free part of the tape about 20 cm long.

5) Secure the middle with glue or simple stitches, place the ends of the tape with a corner and fix them.

6) Cut out the corners and trim the edges with a lighter.

Simple and unusual option making decorations from St. George and black ribbons, as well as an antique decorative element.

Stages of work:

1) We fold the St. George ribbon into a figure eight, securing the joint of the edges. Its length should be 30 cm.

2) We wrap a short piece of ribbon around the center and secure it on the back side.

3) Using black ribbons, we make the bases of the bows, the ends of which meet in the center at the bottom, and connect them with a cross.

4) We assemble the product. We attach a St. George ribbon bow on top of the black cross. We decorate the top with a decorative element.

MK on decorating the St. George ribbon with a flower in kanzashi style

A festive accessory in the form of a St. George ribbon with a flower made using the kanzashi technique will look very interesting and original. A distinctive detail of this style is the use of small pointed petals. It won’t be at all difficult to create such a product; the following master class will help you with this.

You will need:

1) Satin St. George ribbon;

2) Orange and black ribbons;

4) Hot glue;

5) Scissors;

6) Tweezers;

7) Lighter.

Step-by-step instruction:

1) First of all, cut the black and orange ribbons into squares measuring 5×5 cm. You should get seven pieces of black parts and fourteen orange ones. We process all edges using a lighter.

2) Let's start making the petals. We use tweezers, because... the details are very small. Take the orange square and fold it in half into a triangle. Then double it twice more. The result is a tiny petal. We cut off the edge by which we held the workpiece with tweezers and treat it with fire.

4) We fold the black square several times in the same way and apply it to the finished orange petal. The small petal should be inside the black blank, and it, in turn, inside the orange one.

5) Sharp corners have formed behind the tweezers that need to be cut off. We also process the edges.

6) There should be a total of seven three-layer petals, which are joined together using hot glue. We decorate the junction of the parts with decorative elements.

All that remains is to form a loop from the ribbon and attach the finished flower. The result is an original and beautiful holiday brooch, as in the photo below.