How to iron a white T-shirt. How to iron T-shirts made from different types of fabric. How to iron a polyester T-shirt correctly

A T-shirt can be found in the wardrobe of each of us. These are comfortable clothes that are suitable for almost all occasions: for sports, walking, going to a club, or even for staying at home. While tight-fitting T-shirts are usually worn by women, men's T-shirts require careful ironing. How to iron a T-shirt correctly so as not to ruin it?

Casual wear should be not only clean, but also well ironed. Let's look at six basic rules that will help you save time when ironing and avoid ruining your favorite item.

First tip: turn it inside out before ironing. If the print is on the front and back, then place a clean white sheet of paper inside. The pictures won't stick to each other that way.

If the T-shirt has sequins, rhinestones or appliqués, then, of course, they cause inconvenience during heat treatment.

So, when ironing a T-shirt with similar decorative decorations, you need to adhere to the following rules:

Heat treatment - only on the reverse side of the product; for the front part it is best to use a steamer.
When ironing from the reverse side, do not touch the sole of the iron to the surface on which the decor is applied.
If the sticker is made of rubber, then this area needs to be ironed only through very thick paper.
If the T-shirt has buttons, then you need to take into account that such parts are very sensitive to high temperature. When ironing, it is better to avoid the places where they are sewn. You can only walk your nose along the fabric near the button.

Second tip: if the T-shirt is bright or dark, then it needs to be ironed from the inside out. Otherwise, you will leave shiny marks on the seams.

Third tip: read what is written on the label. How to iron a T-shirt? Before ironing, be sure to read the operating instructions.

Fourth tip: iron small parts first: sleeves, collar, peplum, pockets. Then move on to the main part.

Fifth tip: to avoid stretching the item while ironing, decide on the direction.

Tip six: after ironing, hang the T-shirt on hangers and leave until it cools completely.

After which the product can be folded. This way you can avoid creasing of the fabric, which is difficult to iron.

How to iron cotton?

Cotton is the most unpretentious material among others. It is very easy to iron. However, there is no need to deviate from certain rules:

The optimal temperature for steaming cotton threads is 200 degrees.
It is best to straighten bends on cotton fabrics with moisture, namely:

Iron the T-shirt slightly damp after washing.

How to iron polyester?

This is a synthetic material that is afraid high temperature. How to iron a polyester T-shirt?

To avoid wrinkles, dry the T-shirt on a flat, horizontal surface. Before doing this, carefully level the problem areas.
Place the T-shirt on the ironing board so that there are no wrinkles.
Place damp, clean gauze on top of the product.
Set the iron to Silk mode.
Iron gently without pressing too hard.

Ironing viscose and silk

How to iron a viscose or silk T-shirt? It is not recommended to iron these materials at all. Because such fabrics hardly wrinkle. However, if there is a need to use an iron, then first hang the product in a steamed bathroom. Allow the T-shirt to unwind for a certain period of time.

After which you need to follow some rules when ironing items made of silk or viscose:

set the minimum heating temperature of the iron (up to 100 degrees);
iron the item only from the inside out;
When ironing, use only the tip of the iron, almost without touching the fabric;
If there are places that do not need ironing, then do not iron them.

If a product made of silk or viscose comes into direct contact with the iron, you risk simply ruining the item.

Ironing knitwear

Many people mistakenly believe that there is no need to iron knitted items. They look pretty good anyway. But this is a huge mistake. Knitwear, like any other fabric, requires a special type of ironing. At least, at least from time to time.

The main rule: do not set the temperature on the iron too high. Otherwise, the knitted product may lose its original attractive appearance under the influence of strong heat treatment.

If you have a knitted T-shirt with long sleeves, then you need to start ironing with them. Iron each sleeve separately on both sides. Then move on to the front of the T-shirt. Here, start by ironing the collar. And finish ironing with the back. To make the process easier, use steam from an iron or a spray bottle.

How to iron a polo?

During ironing, all odors and dirt intensify. Therefore, only clean items need to be ironed. And fill only purified water into the iron’s steam generator.

Before ironing the polo, turn the item inside out. It is this product that needs to be ironed in the following sequence:

seams on the sides;
shelves and back;
sleeves;
then turn the product right side out and iron it again.

If the polo has a chest pocket, then it needs to be ironed both outside and inside.

When ironing sleeves, there is no need to form arrows on them. Now this is irrelevant and is considered bad taste. It is best to iron the sleeves in a circular manner without forming arrows. To do this you need to buy a special device. Outwardly, it resembles a mini ironing board. Usually sold as a set.

How to iron a T-shirt without an iron?

Most often, when traveling, you don’t have an iron at hand. Forgot or just didn’t fit in your suitcase? No problem! If you urgently need a neat T-shirt, then you can put it in order without an iron or steamer. How to iron a T-shirt without an iron? Try one of the methods that is convenient for you:

Lay your clothes out on a flat surface. Using damp palms, smooth it out.
Spray water from a spray bottle onto the product, put on a slightly damp T-shirt. It will dry on you.
Hang a T-shirt over your bathtub with hot water.

T-shirt is the most common casual uniform clothes. They wear it in different ways: under clothes or over the body without additional things. It doesn’t matter whether you are at home or at work, playing sports or just on vacation, you always want to stay neat. And in order for things to remain in shape for a long time after washing or before use, you need to know a few basic rules that apply when ironing things.

The rules presented in this paragraph do not require compliance, but rather are advisory in nature. However, they will make life much easier for those who start following them. The ironing process will be more convenient, enjoyable and correct.

Let's look at the main tips:

iron only on a flat, soft surface;
do not leave the iron turned on unattended;
do not keep the hot iron on one area of clothing for a long time;

you need to iron only clean things, preferably semi-damp ones after washing, because such clothes are easier to iron and retain their appearance better;
study the label on the clothing, this will help you not spoil the item, and know exactly the type of fabric of the T-shirt;
iron the T-shirt from the wrong side;
It is not recommended to iron poorly washed or worn items to avoid stains;
a T-shirt that has been crumpled for a long time after washing must first be moistened;

sleeves should be ironed using a special nozzle, in a circular motion, to avoid arrows, bends and bruises;
first you need to iron the small details, and then the base, strictly along the length of the T-shirt, avoiding stretching;
It is recommended to iron away from yourself, otherwise there is a risk of getting burned;
Ironed items should be stored on hangers or wait until they cool down and carefully put them in a closet.

You can add other features, taking into account which will simplify the ironing process. But over time, many people themselves find rules that suit themselves and their things and follow them in the future.

Fabric types

The ironing technology itself depends on the types of fabrics. In order not to spoil your favorite things, you need to know a few tricks.

Cotton. The most unpretentious fabric. If there is a print or dark colors, then it is recommended to iron from the wrong side, in other cases it is possible from the front. If the T-shirt is dry, then simply steam it; if this function is not available, cover it with damp gauze and iron it. High temperature (170-200 degrees) and steam are used.
Viscose, silk. These are fabrics that require careful handling; it is not recommended to iron them; you can simply hang them over hot water. But if you need to iron, then iron only from the wrong side, using the nose of the iron. You should not iron areas that do not need it, as it will large quantities moisture may leave stains. The mode for silk is no more than 100 degrees (preferably 60-70) and no steam is used. For viscose, the temperature should be a little higher (120 degrees), and the amount of steam should be minimal.

silk

viscose

cotton

Polyester. Synthetic material, most often sports items, is better to shake and hang until dry. You need to iron such T-shirts from the wrong side, covering them with gauze. Polyester does not tolerate high temperatures and may melt. The material should be ironed in silk mode, barely touching the clothes, and without steam. To keep ironed, you can roll it into a roller.
Knitwear. It doesn’t really need ironing, but to keep things in good condition longer, it’s best to simply steam the front part or use medium heat without stretching when ironing. Fold the T-shirt over the hangers or roll it into a roller.

knitwear

polyester

T-shirt styles

Not every T-shirt can be ironed general rules. In order not to iron it many times and to maintain the shape of your clothes, you need to understand some of the nuances that also lie in the style of T-shirts.

With collar and cuffs. The ironing technology is more complicated than the classic one: first we iron small parts, strictly from the edge to the middle, straighten the collar so that there are no folds, use gauze, and iron the rest of the T-shirt according to the general rules. To prevent the collar from losing its shape, you can use starch or a starch-based spray.
T-shaped. The T-shirt, shaped like the letter “T,” comes in both long and short sleeves. First we iron the sleeves, then the front front of the T-shirt, then the back. If there are any additional decorations, iron only from the wrong side.

T-shaped

With collar and cuffs

With print. These are more sophisticated t-shirts, but they are bright and youthful. They should be ironed only from the wrong side, without touching the print with the iron.

You can place white paper under the print to avoid imprinting on the opposite side or causing contamination on the iron and T-shirt.

With rhinestones and sequins. Rhinestones are a capricious accessory, so the T-shirt needs to be carefully ironed from the wrong side, then the front part is steamed.

What to do if you don't have an iron?

You may not always have an iron at hand, but you always want to be neat. There are several tips on how to get out of the situation.

Fill the bathtub with hot water and hang the T-shirt over the bathtub. This is the longest method and is best done at night.
Pour boiling water into an iron mug and iron the problem areas.
If in your washing machine If the “Drying” or “No Crease” modes are set, this is another way to avoid ironing. However, you cannot often use such modes, because due to the high speed in the machine, things can quickly deteriorate.
Spray clothes with water and dry with a hairdryer.

Check the tag, usually T-shirts are washed at 40 degrees; if the product has a pattern, then it needs to be turned inside out. Dry clothes on a line, being careful not to use clips.

Then proceed to ironing, taking into account all the criteria described earlier. Also, the T-shirt can remain in good condition if it is folded. It is better to stack T-shirts on top of each other or hang them on hangers. Following these simple rules, you won’t be able to part with your favorite things for a long time.

How to iron a T-shirt with an applique, see the following video.

A T-shirt is a must-have attribute of spring-summer clothing in the wardrobe of each of us. Practical and comfortable, it is indispensable for everyday wear and does not require any special care tricks. However, sometimes a simple T-shirt can be ruined, for example, by improper ironing. We will tell you how to iron a T-shirt so that it looks attractive for a long time.

Basic Rules

It is correct to iron things on a soft surface. To do this, it is more convenient to use a board, since clothes stretched over it will be protected from the formation of folds on the opposite side. Iron an area of fabric on the surface of the board, and then carefully move the T-shirt.
If there is no board, carefully lay the T-shirt on the table and iron alternately on both sides. Don't forget to cover the table with a light blanket before ironing.
For sleeves, use a special small board, which is usually included in the set of ironing boards.
After washing, make sure that the laundry does not dry out. All types of fabrics iron out better when slightly damp.
Before ironing your T-shirt, carefully read its label to ensure you select the correct ironing temperature setting.
You can only iron a clean T-shirt, otherwise the hot iron will firmly “weld” the dirt to the fabric.
Do not put things in the closet immediately after ironing - they will quickly wrinkle. Give the shirt some time to cool and then hang it on padded hangers.

Determining the type of fabric

The most commonly used materials for making T-shirts are cotton, viscose and polyester. Let's look at how to properly iron items made from these fabrics.

Cotton products

It is believed that all products should be ironed from the wrong side, but if there are no inscriptions or drawings on a cotton T-shirt, you do not need to turn it inside out. Exceptions are made for dark items, since in this case shiny marks may remain on them in the area of the seams.

Cotton is usually ironed at 200 degrees. Dry clothes can be covered with damp gauze or sprayed with water from a spray bottle. If the fabric has not yet dried, there is no need to moisten it additionally.

If your iron has a steam setting, it will be great for ironing cotton.

Viscose products

Viscose is a more delicate material than cotton, so it cannot be ironed with a hot iron. The recommended ironing temperature for this fabric does not exceed 100 degrees, which corresponds to the “silk” mode.

It is best to iron a viscose T-shirt when wet, after first turning the product inside out.

Polyester products

Polyester is often used for sewing sportswear. This material doesn’t really like ironing, so after washing you can simply shake the wet T-shirt, straighten it and hang it to dry. You may not need ironing after this.

If the T-shirt is very wrinkled, cover it with damp gauze and gently iron it on the “silk” setting. When only light ironing is required, you can do without gauze, but the temperature should still not exceed 100 degrees.

How to iron a printed T-shirt

A T-shirt with a pattern should only be ironed on the wrong side, since a hot iron can melt the rubber logos.

An important nuance: if you iron on a table and not on an ironing board, be sure to put a sheet of paper inside the T-shirt - this simple action will protect you from the risk of getting an image imprinted on the back.

By following these simple care rules, you can easily keep your clothes in their original condition, and the bright designs and funny inscriptions on your T-shirts will delight you and those around you for many more seasons.

Our editor's youngest son, Vitya, is gradually getting involved in household chores. Recently, when he came to the editorial office after school, he asked how to iron a T-shirt. This gave us an idea about what the topic of the article would be next.

Preparing for ironing

To avoid ruining your favorite clothes, iron only on a clean, flat and soft surface. If you don't have a good ironing board, use a regular table. Just first cover it with a sheet folded several times or a light-colored blanket made of natural fabric.

Never iron dirty clothes. If you've worn a T-shirt for even a few hours, wash it first and get rid of the stains, otherwise high temperatures will further seal the dirt into the material.

Choose the mode wisely for each type of fabric. If you iron something made of delicate material with too hot an iron, you can simply melt it.

Before ironing, carefully inspect the iron itself. If there are traces of scale or rust stains on it, clean it first, otherwise you will transfer the dirt to the fabric.

If your iron has a steam function, fill it with fresh, clean water.

Choosing the right temperature

To avoid burning your favorite T-shirt, set the temperature to the right temperature. Cotton can be ironed at 220 degrees or on the third iron setting. Try to iron cotton items slightly damp. If they are too dry, the wrinkles may not be smoothed out. If your clothes are dry or very wrinkled, first moisten them with water from a spray bottle and wait a few minutes.

Polyester must first be steamed without touching the fabric with an iron. Then place a piece of damp gauze on the T-shirt and iron through it at a silk temperature setting. And if you dry synthetic fabric on a hanger, it will straighten itself without ironing.

Acrylic can only be ironed through damp gauze at the lowest iron temperature. Viscose requires a minimum temperature regime. This fabric wrinkles easily and is sensitive to heat, so iron it only from the wrong side.

Let's start ironing

First, start ironing the small details on the product: sleeves, cuffs, pockets, collar, if there is one. Then iron the front side before moving to the back. In order not to leave on short sleeves ugly wings, use a special stand, which is sold along with the ironing board, or roll up a roll from a towel and stick it into your sleeve. Iron the collar straightened. Make sure that no creases form on it. To do this, place a piece of gauze folded several times under it.

If you are not going to wear the item immediately after ironing, do not rush to fold it and put it in the closet. Lay or hang it flat and wait a few minutes for the fabric to cool completely. Then new creases will not appear on it.

What to do with rhinestones, stickers and embroidery

High temperatures can cause serious damage fashionable things With decorative finishing. To prevent them from remaining on the soleplate of the iron, follow simple rules. T-shirts with stickers can only be ironed on the reverse side. To prevent the design from being imprinted on the ironing board, place a white sheet of paper underneath it.

T-shirts with rhinestones or sequins are first ironed on the reverse side, and then steamed at a distance from the front. Do not place the iron too close to the jewelry, as this may cause it to melt. The embroidery is also ironed from the reverse side of the product.

Ironing T-shirts is quite easy, the main thing is to set the temperature correctly and pre-wash the item so that there is no dirt on it. Vitya coped with the new task perfectly, ironing several of his favorite things under the supervision of his mother.

Similar materials

Content

Wardrobe modern man, which follows fashion, contains more than one type of T-shirts. Caring for these clothes has its own little secrets. Knowing the basic ironing techniques, you don’t have to worry about ruining the aesthetic qualities of your T-shirts. The suggested tips are effective and easy to follow.

How to iron a T-shirt correctly

Please note: the tips can be applied to other items of clothing.. General recommendations for ironing are as follows:

Pay attention to the label, which contains instructions for use, heating temperature of the iron, and ironing modes.
It is recommended to iron T-shirts on an ironing board, or, if there is none, on a flat surface, having previously laid a blanket on it.
To prevent the fabric from being pulled in one direction, you need to use arcuate or circular movements.
Knitted T-shirts are ironed immediately after washing. This will protect things from creases and bends.
It is advisable not to move the iron over knitwear, but to apply it to the fabric for a couple of seconds. In this case, there will be no traces of seams.
If the T-shirt has been lying around for some time, you must first spray it with water from a spray bottle.
Iron dark and bright T-shirts on the wrong side.
Immediately the basques, collars, pockets are smoothed, and only then the main parts.
If the T-shirt is not very fresh, you should not iron it. Even small stains under the influence of heat will be “absorbed” into the fibers of the fabric, and subsequently they will be difficult to remove.
When ironing sleeves, it is recommended to use a special device on the ironing board. This will eliminate curling and unnecessary arrows.
After ironing is completed, it is recommended to hang the T-shirt on hangers. When it cools down, you can fold it - this way the T-shirt will wrinkle less.

This material is considered the most unpretentious, so ironing cotton items will not be difficult:

The most suitable temperature for cotton or polycotton (a modern combined fabric that consists of artificial and natural fibers) is 200 degrees.
In the presence of decorative elements The shirt is allowed to be ironed from the front side.
You can smooth out wrinkles in cotton fabrics in the following ways:

put wet gauze on top;
use the “steam” function;
sprinkle with water before cooking;
iron immediately after washing.

The peculiarity of this material is that it is afraid of high temperatures.. If it is possible not to iron polyester T-shirts, it is better to do so. To do this, the wet product must be laid out on a flat surface, all wrinkles straightened, and dried. If ironing is necessary, the rules are as follows:

Use only “silk” mode.
Cover the top of the product with gauze, wet or dry - it doesn’t matter.
Iron on reverse side only, do not use steam.
Do not press the iron too hard on the fabric.

Iron on the “silk” setting using a minimum amount of steam.
The heating temperature should be no more than 100 degrees.
It is advisable to iron on the wrong side.
Do not iron areas that do not need it.

T-shirt with a pattern or rhinestones

Often, T-shirts, not only for children, but also for adults, are decorated with prints or rhinestones. These T-shirts require a delicate approach when ironing. It is important to comply with the following conditions:

It is advisable to carry out heat treatment of clothes with decor from the reverse side.
It is better to steam the product with rhinestones.
During ironing, do not touch the print with the iron.
Buttons and fasteners can be “afraid” of high temperatures, so it is advisable not to iron around them or do it very carefully.
If the designs are printed on the back and front, then thick paper should be placed inside the T-shirt to protect the prints from sticking together.
If the basis of the pattern is rubber, this area should only be smoothed through clean and thick paper, which will protect the clothes from sticking to the ironing board.

It is much more difficult to iron a T-shirt with panels, cuffs or collars. The ironing order is slightly different here:

You need to start with the collar or other decorative elements. At the same time, move the iron from the edge of the product to the middle.
iron with inside, but if there are overhead elements (cuffs, pockets) - from the front, I use damp gauze for additional steaming and protection of the surface from the effect of shiny fabric.
When all the small details are in order, then the ironing process is standard.