DIY Christmas tree template made from paper. Paper Christmas tree: master class. For postcards: simple but original

    The Christmas tree is the most relevant craft for the New Year. It can be made from almost any available materials: fabric, napkins, polystyrene foam, sisal, thread, yarn, but the most common are cardboard and paper - everyone has it at home and is easy to use. We present to your attention several master classes on making a three-dimensional Christmas tree from paper:

    Or like this interesting option, where first a cone is made from cardboard, then circles are cut out of green paper, but in different shades (it looks more beautiful), then these circles are glued from bottom to top onto the cone:

    I want to offer you two ways to make a three-dimensional paper tray, and it will be completely easy to do.

    Here's the first one:

    Here you will need to acquire a compass and, in the same way as in the first picture, draw circles of different diameters for successive tiers. We divide it into twelve equal strips, which we cut to the central circle and further into pieces, and we fold the halves and glue them together. And we attach the tiers to the wire.

    Here's the second option:

    Here you need to draw semicircles of different diameters on green paper, then cut them out. glue and cut as shown. It's very very simple.

    Scheme of a step-by-step volumetric Christmas tree made of paper. Cut several circles from green thick paper, and if you take the time and draw an image of toys along the contour, you will get a Christmas tree with toys right away. Make cuts, wrap along the lines and place on the wire.

    Volumetric paper Christmas tree in quilling style, step by step, cut into strips, roll into shapes and one on top of the other in the form of a Christmas tree.

    Christmas trees in quilling style can be decorated with bright beads.

    A voluminous paper Christmas tree can be made from paper strips. On a cone, and you choose the height of the cone yourself, stick folded paper strips in a circle, starting from the bottom, the tree will turn out rustling and even lush.

    It’s very easy to make a paper Christmas tree, even a child can do it..

    For clarity, I will attach photographs to the description.

    We make two circles with a compass, one in one. Using a ruler, divide into 12 parts.

    Cut as shown in the photo.

    Glue the cut strips together. So that they form a cone.

    We put it upside down on a stand, which can serve as ordinary wire.

    Another option is how you can make a voluminous Christmas tree from paper napkins. To do this you will need napkins, glue and skewers or thick wire. We roll the napkins into a cone and glue the sides together; you need to make several of these cones, but of different diameters. Then you need to attach these cones to a skewer or wire, first the larger ones, then the smaller ones. You can secure them using a small piece of tape with inside, under a napkin. If you do it on wire, you can cover the wire with white paper in advance.

    There are several ideas on how you can make a Christmas tree out of paper; this is a good and fun activity with children.

    This is by folding paper branches, for this we need to fold a sheet of paper as in the photo in the shape of a spruce, all steps must be repeated carefully and you will get a wonderful Christmas tree.

    Still there nice idea, such a voluminous Christmas tree made of paper.

    To do this, we need to cut out four of these Christmas trees for one tree using a template; it is better to use double-sided colored cardboard

    and now, they need to be glued together by the walls, as in the photo, so that the glue grabs the sides of the tree, you can secure them with paper clips

    also make stars and put them on our Christmas tree and you’re done.

    To make the basis for such a Christmas tree, we cut out a semicircle from paper with a radius equal to the height of our future Christmas tree. Let's roll it into a cone and fasten the sides with a stapler.

    Cut wide ribbons from crepe paper. Across these ribbons, with an indentation of a centimeter and a half, we make cuts to the middle of the ribbon. It turns out to be a kind of fringed strip on one side. Starting from the bottom, having previously coated the cone with glue, with the fringe facing down, we begin to wrap our strip of paper onto the cone, gluing it to it. We move upward in progressive turns. We will sharpen the top and coat it well with glue.

    It should turn out like this -

    Now let's decorate the Christmas tree with toys; their role will be played by foam balls of different sizes, strung on a thread or fishing line. The balls need to be painted in different colors, and also, in a spiral, following the strips of crepe paper, placed on a cone, under our improvised branches.

    As a result, you will get such a voluminous do-it-yourself paper tray -

    You can make a three-dimensional Christmas tree out of paper together with your child in kindergarten with your own hands.

    For this purpose template cut out Christmas tree made of colored paper.

    Paper is ideal for scrapbooking. Exactly along the middle we cut the Christmas tree to the middle. One half on top and the other on the bottom. We insert both halves into the slots. This way the Christmas tree is voluminous and stable.

    The next paper Christmas tree is made in the same way. But you need to cut it out according to a template or stencil.

    Another paper Christmas tree for children's creativity. Double-sided paper is used here. For the stand - corrugated cardboard, pencil and elements for decoration, glue for fixing the pencil to the base.

    Master class on making a paper Christmas tree

    Video master class on making a Christmas tree out of paper with your own hands

    Approaching New Year and I want to do something for the holiday with my own hands. A paper Christmas tree will help decorate the interior, or will be an excellent gift. It’s not difficult to make, nothing special is required: colored paper, glue, scissors.

    You can make a Christmas tree like this on a wooden skewer, like below. This is one of the simplest options for a DIY voluminous Christmas tree.

    In addition to green paper, you need a wooden skewer and beads.

    A circle is cut out of green paper and folded eight times, then placed on a skewer and secured with hot glue. At the top is a bead.

    Such a Christmas tree can be placed on a saucer, or stand, in a pot and anywhere at your discretion.

    You can also assemble a three-dimensional Christmas tree using the quilling technique.

    You will need the following items to make a Christmas tree:

    First we will make individual elements.

    Such curls are made by twisting strips of paper onto a toothpick. After twisting it, let it unfold freely. The free end is then fixed with glue where it ended up after the strip of paper was straightened.

Openwork Christmas trees made of paper. 2 MK plus several diagrams/templates

Ideas and diagrams on how to cut an openwork Christmas tree.

To work you will need:
- White paper,
- a stationery knife, cutting board or thick cardboard,
- nail scissors,
- paper clips or stapler,
- glue.
1. Stage of creating an openwork Christmas tree
We select and print a diagram or template of our future Christmas tree. This is one version of the template, at the end of this page I also attach other options for the pattern of openwork Christmas trees

2. Place a sheet of thick cardboard under the template and secure the sheet and cardboard with paper clips or a stapler so that the sheet holds tightly.
3. Using a stationery knife, we cut out the patterns inside the Christmas tree, and then proceed to cutting out the Christmas tree along the contour using small nail scissors. Please note that we will need two identical Christmas tree parts






4. When the two parts of our openwork Christmas tree are ready, fasten them with glue at the bottom, as shown in the picture.


There is another option on how to make an openwork Christmas tree!
To do this we need to take three sheets of paper and fold them in half lengthwise


Then you need to print this or another template you like and cut it along the fold line

Curved sheets must be placed on top of each other so that the fold of each is on the right. And on top we put our template, or rather, its half

Using paper clips or a stapler, fix the sheets

Using small but sharp scissors, cut out the Christmas tree along the contour

Using a utility knife or nail scissors, cut out the internal elements of the Christmas tree


Let's see what happened... but there should have been three parts, as shown in the illustration


The next stage of creating an openwork Christmas tree: you need to open the parts, fold them evenly and stitch them with thread along the fold line



And a few more options for templates or diagrams for cutting out an openwork Christmas tree





And from this pattern you get such a beautiful openwork Christmas tree!




Print ready-made template paper Christmas trees or create your own. If you decide to create a drawing yourself, then fold paper sheet and draw a Christmas tree, and then draw a likeness inside it openwork pattern. Afterwards, the stencil needs to be cut out using a stationery/layout knife



Favorite craft of all children - DIY paper Christmas tree, but adult craftswomen will also love this kind of creativity, because using very simple and affordable material, you can get an original element of New Year’s decor, Christmas tree toy or a gift for your beloved grandmother. you can do at home with your children while having fun as a family.


DIY paper Christmas tree

Curvy DIY paper Christmas tree you will get it from separate circles, they will all be of different diameters, so for such a craft you may need a compass and a simple pencil, with which you will outline the necessary elements on a green sheet. To cut them out, we will use scissors and then glue the elements to the base using glue. You can use a pencil, wooden skewer or juice tube as a base.

This will be the children’s first experience with a compass, so before you give them the tool, tell them about safety precautions and the rules for working with it. Then make sure your child draws several circles on a piece of paper of different diameters. Their number depends on the desired size and splendor of the finished Christmas tree. Each circle should be of such a diameter that it is 2 cm smaller than the previous one. Each circle is one tier of our future craft, so when you draw the outlines, they must be carefully cut out with scissors, and even if the edges are slightly uneven, this will not affect the beauty of the finished craft, because we will make each tier wavy.

Next, you need to fold each circle: once in half, then the resulting semicircle in half again, and this sector in half again. In total we will fold each circle three times. We should get clear lines, so we need to draw scissors along the folds.

The corner of each folded circle should be cut off so that in the center of the unfolded element there is a hole, the diameter of which coincides with the diameter of the base - a tube or pencil. After this, the circles can be straightened.

The base also needs to be decorated, covered with green paper or wrapped with tape. When all elements are ready, it can be assembled DIY Christmas tree paper craft, to do this, all the elements must be strung on a tube: from the largest circle at the bottom to the smallest at the top.

All that remains is to decorate the top; for this you can glue a bead or a decorative red star. You can glue sequins, small beads or sparkles onto the lush “branches”.


DIY Christmas tree: paper craft

There is another option, how to make a Christmas tree out of paper with your own hands, for which you will need the same set of tools and materials as for the previous craft. The main materials are a green sheet, a pencil and compass, a ruler and scissors, PVA glue. We will also use wire and a needle.

In this case, we will also collect a Christmas tree from individual elements of different diameters, the outline of which we will draw with a pencil and a compass. The lowest tier will have the largest diameter, but in this case we need to draw each cut out circle correctly, because it should have cone-shaped needles, as shown in the photographs.

After you draw a circle, you need to draw another one inside, stepping back half the radius from the edge. Then it must be divided with a ruler into twelve identical sectors.

At the next stage, we will need scissors, with which we will make cuts along the line of each sector. The cut should reach the contour of the inner circle, after which at the end of each sector you need to roll up a cone and glue it with PVA glue. When you have rolled all the cones on one piece - there should be 12 of them, you can move on to the next piece, which must be drawn in the same way, cut and glued together.

In this case, the wire will be collected DIY paper Christmas tree, master class assumes that our aerial Christmas tree is stable. One end of the wire must be twisted into a spiral. To make a spiral, you need to wind the wire around a pencil, layer upon layer, and point the remaining length upward.

You need to make a hole in the center of each circle with a large needle, and then string all the layers onto the wire. can also be made in the form of a paper cone.


How to make a Christmas tree out of paper with your own hands

We have already done DIY Christmas tree decorations made from paper And New Year cards using the quilling technique. This time we won't do flat figurine, and with the help of quilling we will create a three-dimensional Christmas tree. You can cut the strips yourself or buy a ready-made quilling kit.

The stripes should be half a centimeter wide. The sheet must be drawn into strips and then cut into strips. Four more stripes one centimeter wide are for the base, and for decoration there are thin stripes of yellow and red. We will perform quilling elements without special tools, and we will wind the stripes only with the help of a toothpick.

When working with paper, to ensure reliable fixation of the elements, it is enough to use only PVA glue, and it will last for a long time.

First we will wind 5 mm green strips - we will need four of them different lengths. 30, 20, 15, 10 cm - they need to be twisted with a toothpick, then loosened a little so that the spiral is not tight and the tip is fixed with a drop of glue. Use your fingers to squeeze one edge of the spiral to form a “drop” shape, and then bend it slightly. The result is a teardrop pattern reminiscent of the popular paisley print.

Wide strips must be wound tightly around a toothpick, because this will be the trunk of our future Christmas tree. The tip of the strip must be secured with glue so that the spiral does not unwind.

We will need a strip 30 cm long for the top: it should also first be twisted into a spiral, and then slightly unraveled and given the shape of a drop.

Although it is very simple to do DIY paper Christmas tree, video The lesson may be useful for you to become more familiar with the quilling technique, because a beginner does not yet know how to correctly create “drop” or “eye” elements, or how to curl strips correctly.

When we assemble the Christmas tree, we should use Moment glue, which ensures instant fixation of all elements. You can first glue each tier to the trunk, and then assemble the layers, or vice versa, first glue the parts of the trunk, and then glue the “drops” - the branches. DIY paper Christmas tree star can also be made using the quilling technique.

The parts of the barrel must be glued together sequentially, and a toothpick must be inserted into the center, which will ensure the strength of the base. Then you can glue the branches: we will start with the smallest “droplets”, which are glued on top, and the largest branches will go below.

We will use thin red and yellow stripes to make. This time, the paper can be rolled without a toothpick, but the tip must be fixed with glue, and then the balls must be glued to the branches.

We can twist a stand for such a Christmas tree from white stripes, and make snowdrifts using napkins rolled into lumps; we can also decorate the stand with snowdrifts using cotton wool. We will get an original craft “Christmas tree in the snow”, which the schoolchild will be happy to do.


DIY corrugated paper Christmas tree

We have already looked at several original ideas how can it be done tree made of corrugated paper with your own hands. Corrugation is an ideal material for creating beautiful New Year's crafts, working with him will be interesting for both preschoolers and adult craftswomen. There are many ideas for making such a craft, but they all boil down to one technique: first you need to make a cone from cardboard, and then cover this cone with paper elements.

The cone can be made of any size using a sheet of cardboard, whatman paper or a piece of wallpaper. You can roll the sheet into a cone, glue the edges together, and then cut off the excess paper from the bottom. This option is suitable if you are making a large cone. A small cone can be rolled up by first drawing out the base. You need to draw a “sector” on a sheet of cardboard. Draw a quarter circle with a compass, draw straight intersecting lines along its radii with an angle of 90-120 degrees.

Then cut out this sector and glue it along the joint. The bottom of the joint can be fixed with a stapler, and the edges can be glued with double-sided tape. The cone-shaped base for your future Christmas tree can remain hollow, because corrugation is a very light material, and the empty base will withstand such a load. To give the base a finished look, you need to glue a circle underneath. The radius of the circle should be one centimeter larger than the radius of the base of the cone. Then the edges of the circle must be cut in increments of one and a half centimeters along the entire circumference. The depth of the cut should be one centimeter. Bend the resulting cuts upward and grease them with glue, and glue the bottom into the cone-shaped base.


DIY paper Christmas tree toy

If you take a small cone-shaped base, no more than 10 cm high, then you will get an original New Year's DIY paper Christmas tree toy, which can become a decoration for a holiday tree. In addition to cardboard, you can also use plastic bottle. You need to cut off the neck and bottom from it, you are left with a straight cylinder that needs to be cut in a straight line on one side. We will twist the resulting piece of plastic into a cone.

The corrugation should be cut into strips 5 cm wide. We will glue these strips to the cone in layers, and not in a spiral. One edge of the strip should be made wavy, twisting it with your fingers, as shown in the picture. Then the second edge must be glued to the base, starting from the lowest tier. The second tier should cover the place where the bottom strip is glued. So you should cover the entire cone with corrugated strips, and you will succeed fluffy Christmas tree.

The cone base can be used for other children's crafts; it can be pasted over using the trimming technique, using squares of napkins or corrugations; it can be pasted over with strips of wrapping paper, candy wrappers or foil.

If you want to hang a toy on a spruce branch, then you need to glue a satin ribbon on top and make a loop from it, tie a bow on the top of the head.

Using templates, it’s easy to make original three-dimensional paper Christmas trees, which are equally good as New Year’s interior decor and homemade Christmas tree decorations.

To work you will need paper or thin cardboard, a template and scissors.

Volumetric Christmas trees made of paper: 3 options

1. Option

Despite the sketchy appearance, the Christmas tree looks beautiful and interesting. To make it, you will need a rectangular piece of paper that needs to be folded in half.

The width and length depend on the desired size of the Christmas tree, but it is important to take into account the template data so that it fits into the area of ​​the paper folded in half.

Print the template and cut it out.

Then you can make the Christmas tree. But, this is if you have plain paper. You need to make a Christmas tree from cardboard as in my example, since not every printer can use thick paper. That is, trace the printed and cut out template on cardboard and cut it out again, but this time into a cardboard blank. Another option is to redraw it.

Please note that the straight dotted line should be on the fold of the paper. You should also cut along the lines from the fold side.

This is what you will get for a Christmas tree.

For further work, open it.

Then the cut strips need to be directed through one in the other direction, making folds on the sides. That is, first bend the second strip inward.

Then leave the third unchanged, but direct the fourth strip in the other direction.

Repeat until you run out of stripes. Watch the side folds, it is advisable that they are even. The smallest one can be bent with a thin object - a pen rod, a kebab stick, etc. At the very end, bend the sides a little. You will get such a voluminous Christmas tree made of paper, stable on the surface.

Option 2

Another cute Christmas tree that is easy to make using a template.

Fold the paper in half and cut along all the lines except the dotted ones.

Open the workpiece.

Bend the strips in the other direction, alternating them through one another.

The Christmas tree is ready.

3. Option

The template is not much different from the first one. The difference is that here the lines are straighter.

Use the template.

Cut out the paper blank.

Open it and direct the stripes in the other direction, alternating them through one another. Bend the sides.

This is how you will get voluminous paper Christmas trees.

They can be decorated with paper toys, a variety of New Year's decor, stickers.

Now, starting with the largest part in decreasing order, we string all the blanks onto the barrel. At the top, we insert a small accordion made from the same paper into the hole in the handle body. Our Christmas tree is ready to become New Year's decoration interior

Happy creativity!

Paper Christmas tree No. 2

You can make many interesting crafts from colored paper. But as we get closer New Year's holidays we are increasingly interested holiday decorations. You can also make a small Christmas tree out of paper. If you follow everything exactly according to the instructions, then this is quite easy.

The Christmas tree is about ten centimeters. It will fit perfectly into the office interior. Even the most modest workplace can be decorated with the help of this “forest beauty”.

If you do a craft with a child, you can add bright decorations. Cut out circles from multi-colored paper and glue them onto the “branches.”

Materials:

green paper;
scissors.

The process of making a Christmas tree

To make our Christmas tree you need a square sheet. To get it from an A4 sheet, fold it as in the picture, cut off the strip on the side. Photo 3.


Fold the resulting square in half twice and diagonally. First in one direction, then in the other direction. These folds will make our task of folding the Christmas tree blank easier in the future. Photo 4.


Let's start putting together the Christmas tree. Fold the straightened sheet diagonally. Photo 5.

Once again. Photo 6.


We bend the corners as shown in the photo. Photo 7.


It should look like this. Photo 8.


Using scissors, we cut off the corners that peek out from below. Photo 9.


To check if we did everything correctly, we can straighten our workpiece. You will get a figure like this, a little like a circle. Photo 10.


Now we begin to fold it along the existing creases. But at the same time we make folds alternately in one direction or the other. What we get is like an accordion that goes in a circle. From below this blank will look like this. Photo 11.


Now we need to make “needles” for our Christmas tree. To do this, we cut the paper parallel to the bottom side of the workpiece. The closer to the “crown”, the shorter the cuts will be. We make them on both sides of the triangular blank. Photo 12.


We bend the resulting slits in the direction from the “top” of the Christmas tree. We repeat this for each paper “twig”. Photo 13.


All that remains is to straighten everything out, and our Christmas tree made of colored paper ready! The top of the head can be decorated with a star or snowflake cut out of red paper.

And another version of a paper Christmas tree, see:

Did you like the product and want to order the same from the author? Write to us.

More interesting:

See also:

Simple crafts. DIY rattles
Simple DIY rattles Probably, many parents have noticed that children are not always interested...

Bunched broom
At the same celebration of Maslenitsa in "Ethnomir" everyone could take part in a free master class...

How to draw a Christmas tree. Step-by-step master class
Another master class by Ekaterina Karpuschenkova on how to draw a New Year tree. The Christmas tree is one of the most...